查看所有供应商和价格请点击：
| 中文名 | N-(1-萘磺酰氯)-L-苯丙氨酸氯 |
|---|---|
| 英文名 | (2S)-2-(naphthalen-1-ylsulfonylamino)-3-phenylpropanoyl chloride |
| 中文别名 | N-(1-萘磺酰)-L-苯丙氨酰氯 |
| 英文别名 | N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride |
| 熔点 | 104ºC |
|---|---|
| 分子式 | C19H16ClNO3S |
| 分子量 | 373.85300 |
| 精确质量 | 373.05400 |
| PSA | 71.62000 |
| LogP | 4.96650 |
| 折射率 | 19 ° (C=2, Dioxane) |
| 储存条件 | 室温 |
| 分子结构 | 1、摩尔折射率：100.3 2、摩尔体积（cm3/mol）：276.7 3、等张比容（90.2K）：752.5 4、表面张力（dyne/cm）：54.6 5、介电常数：无可用的 6、极化率（10-24cm3）：39.76 7、单一同位素质量：373.053941 Da 8、标称质量：373 Da 9、平均质量：373.8532 Da |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:4.7 2.氢键供体数量:1 3.氢键受体数量:4 4.可旋转化学键数量:6 5.互变异构体数量:无 6.拓扑分子极性表面积71.6 7.重原子数量:25 8.表面电荷:0 9.复杂度:554 10.同位素原子数量:0 11.确定原子立构中心数量:1 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 1. 性状：未确定 2. 密度（g/mL, 25 ℃ ）：未确定 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：104 5. 沸点（ºC,常压）：未确定 6. 沸点（ºC 3mmHg）：未确定 7. 折射率：19º 8. 闪点（ºF）：未确定 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：不适用 11. 蒸气压（kPa,25ºC）：未确定 12. 饱和蒸气压（kPa,60ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性：未确定 |
|
N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride
Revision number: 5
SAFETY DATA SHEET Section1. IDENTIFICATION Product name:N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDSNot classified HEALTH HAZARDS Skin corrosion/irritationCategory 2 Category 2A Serious eye damage/eye irritation ENVIRONMENTAL HAZARDSNot classified GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordWarning Hazard statementsCauses skin irritation Causes serious eye irritation Precautionary statements: Wash hands thoroughly after handling. [Prevention] Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, [Response] if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Gently wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride Percent:>98.0%(T) CAS Number:146864-62-2 Chemical Formula:C19H16ClNO3S Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride Section4. FIRST AID MEASURES Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, carbon dioxide. media: Unsuitable extinguishing Water media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak. protective equipment and Entry to non-involved personnel should be controlled around the leakage area by emergency procedures: roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing hazards:devices should be prepared in case of a fire. Use spark-proof tools and explosion- proof equipment. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. May develop pressure. Open carefully. Conditions for safe storage, including any incompatibilities Keep container tightly closed. Store in a cool and dark place. Storage conditions: Store under inert gas. Protect from moisture. Store away from incompatible materials such as oxidizing agents. Moisture-sensitive Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust as possible so that workers should not be exposed directly. Also install safety shower and eye bath. Personal protective equipment N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory protection: Dust respirator. Follow local and national regulations. Hand protection:Protective gloves. Eye protection:Safety glasses. A face-shield, if the situation requires. Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Solid Physical state (20°C): Form:Crystal- Powder Colour:White - Pale yellow Odour:No data available pH: No data available Melting point/freezing point:104°C Boiling point/range:No data available Flash point:No data available Flammability or explosive limits: Lower:No data available Upper:No data available Relative density:No data available Solubility(ies): [Water]No data available [Other solvents]No data available Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. Possibility of hazardous Decomposes in contact with water and liberates toxic gases. reactions: Moisture Conditions to avoid: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulfur oxides, Hydrogen products:chloride Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available No data available Crustacea: Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil No data available Log Pow: Soil adsorption (Koc):No data available No data available Henry's Law constant(PaM3/mol): N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Does not correspond to the classification standard of the United Nations Hazards Class: UN-No:Not listed Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
| 海关编码 | 2935009090 |
|---|
| 海关编码 | 2935009090 |
|---|---|
| 中文概述 | 2935009090 其他磺（酰）胺. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:6.5% 普通关税:35.0% |
| 申报要素 | 品名, 成分含量, 用途 |
| Summary | 2935009090 other sulphonamides VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:35.0% |