Functionally Graded, Bone‐ and Tendon‐Like Polyurethane for Rotator Cuff Repair
Dai Fei Elmer Ker; Dan Wang; Anthony William Behn; Evelyna Tsi Hsin Wang; Xu Zhang; Benjamin Yamin Zhou; Ángel Enrique Mercado‐Pagán; Sungwoo Kim; John Kleimeyer; Burhan Gharaibeh; Yaser Shanjani; Drew Nelson; Marc Safran; Emilie Cheung; Phil Campbell; Yunzhi Peter Yang
Index: 10.1002/adfm.201707107
Full Text: HTML
Abstract
Critical considerations in engineering biomaterials for rotator cuff repair include bone‐tendon‐like mechanical properties to support physiological loading and biophysicochemical attributes that stabilize the repair site over the long‐term. In this study, UV‐crosslinkable polyurethane based on quadrol (Q), hexamethylene diisocyante (H), and methacrylic anhydride (M; QHM polymers), which are free of solvent, catalyst, and photoinitiator, is developed. Mechanical characterization studies demonstrate that QHM polymers possesses phototunable bone‐ and tendon‐like tensile and compressive properties (12–74 MPa tensile strength, 0.6–2.7 GPa tensile modulus, 58–121 MPa compressive strength, and 1.5–3.0 GPa compressive modulus), including the capability to withstand 10 000 cycles of physiological tensile loading and reduce stress concentrations via stiffness gradients. Biophysicochemical studies demonstrate that QHM polymers have clinically favorable attributes vital to rotator cuff repair stability, including slow degradation profiles (5–30% mass loss after 8 weeks) with little‐to‐no cytotoxicity in vitro, exceptional suture retention ex vivo (2.79–3.56‐fold less suture migration relative to a clinically available graft), and competent tensile properties (similar ultimate load but higher normalized tensile stiffness relative to a clinically available graft) as well as good biocompatibility for augmenting rat supraspinatus tendon repair in vivo. This work demonstrates functionally graded, bone‐tendon‐like biomaterials for interfacial tissue engineering.