79439-14-8

79439-14-8 structure
79439-14-8 structure
  • Name: METHYL (Z)-2-(TRIMETHYLSILYL)-2-HEPTENOATE
  • Chemical Name: methyl 2-trimethylsilylhept-2-enoate
  • CAS Number: 79439-14-8
  • Molecular Formula: C11H22O2Si
  • Molecular Weight: 214.37700
  • Create Date: 2017-01-14 02:51:33
  • Modify Date: 2024-01-09 12:16:55

Name methyl 2-trimethylsilylhept-2-enoate
Synonyms methyl (Z)-2-(trimethylsilyl)-2-heptenoate
2-Heptenoic acid,2-(trimethylsilyl)-,methyl ester,(Z)-(9CI)
Molecular Formula C11H22O2Si
Molecular Weight 214.37700
Exact Mass 214.13900
PSA 26.30000
LogP 3.15340
Index of Refraction 1.435
Version 1.3
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameMETHYL (Z)-2-(TRIMETHYLSILYL)-2-
HEPTENOATE, 96%

2 - Hazards Identification

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
METHYL79439-14-8 NoneNone
(Z)-2-(TRIMETHYLSILYL)-2-HEPTENOAT
E, 96%
FormulaC11H22O2Si
Molecular Weight 214,3800 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
ALDRICHwww.molbase.com
Suitable: For small (incipient) fires, use media such as
"alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large
quantities (flooding) of water applied as a mist or spray; solid
streams of water may be ineffective. Cool all affected
containers with flooding quantities of water.
SPECIAL RISKS
Specific Hazard(s): Combustible liquid. Emits toxic fumes under
fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Cover with dry lime or soda ash, pick up, keep in a closed
container, and hold for waste disposal. Ventilate area and wash
spill site after material pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid breathing vapor. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or
repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Keep away from heat
and open flame. Store in a cool dry place.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection is desired, use multi-purpose combination (US) or type
ABEK (EN 14387) respirator cartridges.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

ALDRICHwww.molbase.com
AppearancePhysical State: Liquid
PropertyValueAt Temperature or Pressure
pHN/A
BP/BP Range78,000. - 80,000 °C.3,000 mmHg
MP/MP RangeN/A
Flash Point89,000 °CMethod: closed cup
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
SG/Density0,8930 g/cm3
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Silicon oxide.

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Eye Contact: May cause eye irritation.
Multiple Routes: May be harmful by inhalation, ingestion, or
skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
This combustible material may be burned in a chemical incinerator
equipped with an afterburner and scrubber. Observe all federal,
ALDRICHwww.molbase.com
state, and local environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

Caution: Substance not yet fully tested (EU).
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A