3085-40-3

3085-40-3 structure
3085-40-3 structure
  • Name: DIISOBUTYL SULFOXIDE
  • Chemical Name: 2-methyl-1-(2-methylpropylsulfinyl)propane
  • CAS Number: 3085-40-3
  • Molecular Formula: C8H18OS
  • Molecular Weight: 162.29300
  • Create Date: 2016-05-20 22:21:53
  • Modify Date: 2024-01-05 18:34:07

Name 2-methyl-1-(2-methylpropylsulfinyl)propane
Synonyms Diisobutylsulfoxyd
Diisobutyl sulfoxide
Diisobutylsulfoxid
ISOBUTYL SULFOXIDE
Di-i-butylsulfoxid
Density 0.949g/cm3
Boiling Point 263.4ºC at 760mmHg
Molecular Formula C8H18OS
Molecular Weight 162.29300
Flash Point 113.1ºC
Exact Mass 162.10800
PSA 36.28000
LogP 2.91280
Index of Refraction 1.472

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: DIISOBUTYL SULFOXIDE
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 3085-40-3
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin sensitisation (Category 1), H317
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi IrritantR43
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordWarning
Hazard statement(s)
H317May cause an allergic skin reaction.
Precautionary statement(s)
P280Wear protective gloves.
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Formula: C8H18OS
Molecular Weight: 162,3 g/mol
CAS-No.: 3085-40-3
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
DIISOBUTYL SULFOXIDE
Skin Sens. 1; H317-
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Sulphur oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- log Pow: 1,424
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
The preceding data, or interpretation of data, was determined using Quantitative Structure Activity
Relationship (QSAR) modeling.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: NQ2000000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

CHEMICAL IDENTIFICATION

RTECS NUMBER :
NQ2000000
CHEMICAL NAME :
Isobutyl sulfoxide
CAS REGISTRY NUMBER :
3085-40-3
BEILSTEIN REFERENCE NO. :
1747354
LAST UPDATED :
199612
DATA ITEMS CITED :
1
MOLECULAR FORMULA :
C8-H18-O-S
MOLECULAR WEIGHT :
162.32

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Intraperitoneal
SPECIES OBSERVED :
Rodent - rat
DOSE/DURATION :
800 mg/kg
TOXIC EFFECTS :
Lungs, Thorax, or Respiration - dyspnea
REFERENCE :
PHARAT Pharmazie. (VEB Verlag Volk und Gesundheit, Neue Gruenstr. 18, Berlin DDR-1020, Ger. Dem. Rep.) V.1- 1946- Volume(issue)/page/year: 26,96,1970
HS Code 2930909090

~95%

3085-40-3 structure

3085-40-3

Literature: Kajigaeshi; Murakawa; Fujisaki; Kakinami Bulletin of the Chemical Society of Japan, 1989 , vol. 62, # 10 p. 3376 - 3377

~95%

3085-40-3 structure

3085-40-3

Literature: Kutchin; Rubtsova; Loginova Russian Chemical Bulletin, 2001 , vol. 50, # 3 p. 432 - 435

~96%

3085-40-3 structure

3085-40-3

Literature: Bravo; Dordi; Fontana; Minisci Journal of Organic Chemistry, 2001 , vol. 66, # 9 p. 3232 - 3234

~%

3085-40-3 structure

3085-40-3

Detail
Literature: Ruff, Ferenc; Kucsman Arpad Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), 1982 , p. 1075 - 1080
HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%