Top Suppliers:I want be here

5023-94-9

5023-94-9 structure
5023-94-9 structure
  • Name: N-HYDROXY-3-NITROBENZENECARBOXIMIDAMIDE
  • Chemical Name: N'-hydroxy-3-nitrobenzenecarboximidamide
  • CAS Number: 5023-94-9
  • Molecular Formula: C7H7N3O3
  • Molecular Weight: 181.149
  • Create Date: 2018-08-10 18:41:25
  • Modify Date: 2024-01-05 01:01:47

Name N'-hydroxy-3-nitrobenzenecarboximidamide
Synonyms N'-hydroxy-3-nitrobenzene-1-carboximidamide
m-Nitrobenzamide oxime
N-Hydroxy-3-nitro-benzenecarboximidamide
N-Hydroxy-3-nitro-benzamidine
N-Hydroxy-3-nitrobenzenecarboximidamide
m-Nitrobenzamidoxime
3-Nitro-benzamidoxim
3-nitro-benzamide oxime
N'-Hydroxy-3-nitrobenzimidamide
Benzenecarboximidamide, N-hydroxy-3-nitro-
(Z)-N'-Hydroxy-3-nitrobenzimidamide
3-nitrobenzamidoxime
Density 1.5±0.1 g/cm3
Boiling Point 400.6±47.0 °C at 760 mmHg
Molecular Formula C7H7N3O3
Molecular Weight 181.149
Flash Point 196.1±29.3 °C
Exact Mass 181.048737
PSA 104.43000
LogP 1.06
Vapour Pressure 0.0±1.0 mmHg at 25°C
Index of Refraction 1.643
Version 1.0
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product Name3-NITROBENZAMIDOXIME - 1 GM

2 - Hazards Identification

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
3-NITROBENZAMIDOXIME5023-94-9 225-709-4 None
FormulaC7H7N3O3
Molecular Weight 181,1520 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
ALDRICHwww.molbase.com
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe dust. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a dust mask type N95 (US) or type P1 (EN 143)
respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
ALDRICHwww.molbase.com
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient Log Kow: 1,144
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: Harmful if absorbed through skin.
Eye Contact: May cause eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be harmful if inhaled.
Ingestion: Harmful if swallowed.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
ALDRICHwww.molbase.com
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2925290090
HS Code 2925290090
Summary 2925290090 other imines and their derivatives; salts thereof。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:6.5%。General tariff:30.0%