19763-13-4

19763-13-4 structure
19763-13-4 structure
  • Name: 1,6-hexanediol divinyl ether
  • Chemical Name: 1,6-hexanediol divinyl ether
  • CAS Number: 19763-13-4
  • Molecular Formula: C10H18O2
  • Molecular Weight: 170.24900
  • Create Date: 2018-06-02 08:00:00
  • Modify Date: 2024-01-09 12:34:57

Name 1,6-hexanediol divinyl ether
Synonyms 3,10-Dioxa-1,11-dodecadiene
1,6-Bisvinyloxyhexan
Einecs 243-277-5
Hexanediol 1,6-divinyl ether
Hexanediol divinyl ether
1 6-HEXANEDIOL DIVINYL ETHER
Density 0.866g/cm3
Boiling Point 233.6ºC at 760mmHg
Molecular Formula C10H18O2
Molecular Weight 170.24900
Flash Point 77.8ºC
Exact Mass 170.13100
PSA 18.46000
LogP 2.86700
Vapour Pressure 0.0843mmHg at 25°C
Index of Refraction n20/D 1.446(lit.)
Version 1.2
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product Name1,6-HEXANEDIOL DIVINYL ETHER, 97%

2 - Hazards Identification

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
1,6-HEXANEDIOL DIVINYL ETHER, 97% 19763-13-4 243-277-5 None
FormulaC10H18O2
Molecular Weight 170,2500 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: For small (incipient) fires, use media such as
"alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large
ALDRICHwww.molbase.com
quantities (flooding) of water applied as a mist or spray; solid
streams of water may be ineffective. Cool all affected
containers with flooding quantities of water.
SPECIAL RISKS
Specific Hazard(s): Combustible liquid. Emits toxic fumes under
fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Absorb on sand or vermiculite and place in closed containers for
disposal. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Keep away from heat
and open flame. Store in a cool dry place. Store under nitrogen.
Incompatible Materials: Avoid contact with acid.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection is desired, use multi-purpose combination (US) or type
ABEK (EN 14387) respirator cartridges.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

pH N/A
BP/BP Range205,000 °C760,000 mmHg
MP/MP RangeN/A
Flash Point93,000 °CMethod: closed cup
FlammabilityN/A
ALDRICHwww.molbase.com
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
SG/Density0,8870 g/cm3
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: May occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Eye Contact: May cause eye irritation.
Multiple Routes: May be harmful by inhalation, ingestion, or
skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
This combustible material may be burned in a chemical incinerator
equipped with an afterburner and scrubber. Observe all federal,
state, and local environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
ALDRICHwww.molbase.com
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2909199090

~85%

19763-13-4 structure

19763-13-4

Literature: Okimoto, Yoshio; Sakaguchi, Satoshi; Ishii, Yasutaka Journal of the American Chemical Society, 2002 , vol. 124, # 8 p. 1590 - 1591

~85%

19763-13-4 structure

19763-13-4

Literature: Trofimov, B. A.; Kudyakova, R. N.; Oparina, L. A.; Parshina, L. N.; Vins, V. V. J. Appl. Chem. USSR (Engl. Transl.), 1991 , vol. 64, # 4.2 p. 873 - 877,786 - 790

~70%

19763-13-4 structure

19763-13-4

Literature: Nakamura, Aki; Tokunaga, Makoto Tetrahedron Letters, 2008 , vol. 49, # 23 p. 3729 - 3732

~%

19763-13-4 structure

19763-13-4

Literature: Ishii, Yasutaka; Nakano, Tatsuya; Inoue, Keizo Patent: US2003/83529 A1, 2003 ;

~96%

19763-13-4 structure

19763-13-4

Literature: Bosch, Martin; Schlaf, Marcel Journal of Organic Chemistry, 2003 , vol. 68, # 13 p. 5225 - 5227
HS Code 2909199090
Summary 2909199090. other acyclic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0%