Top Suppliers:I want be here

3353-89-7

3353-89-7 structure
3353-89-7 structure
  • Name: Triphenylsulfonium bromide
  • Chemical Name: triphenylsulfanium,bromide
  • CAS Number: 3353-89-7
  • Molecular Formula: C18H15BrS
  • Molecular Weight: 343.281
  • Create Date: 2018-03-12 08:00:00
  • Modify Date: 2024-01-09 09:49:21

Name triphenylsulfanium,bromide
Synonyms triphenylsulfonium trifluoromethanesulfonate
Triphenylsulfonium bromide
Sulfonium, triphenyl-, bromide (1:1)
triphenylsulphonium bromide
Sulfonium,triphenyl-,bromide
Melting Point 293ºC
Molecular Formula C18H15BrS
Molecular Weight 343.281
Exact Mass 342.007782
PSA 25.30000
LogP 1.78600

Section I.Chemical Product and Company Identification
Chemical Name Triphenylsulfonium Bromide
Portland OR
SynonymNot available.
Chemical Formula((C6H5)3S)Br
CAS Number3353-89-7

Section II.Composition and Information on Ingredients
Chemical NameCAS Number Percent (%)TLV/PELToxicology Data
Triphenylsulfonium Bromide3353-89-7Min. 98.0 (T) Not available.Not available.

Section III. Hazards Identification
Acute Health EffectsNo specific information is available in our data base regarding the toxic effects of this material for humans. However,
exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling
this compound.
CARCINOGENIC EFFECTS : Not available.
Chronic Health Effects
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
There is no known effect from chronic exposure to this product. Repeated or prolonged exposure to this compound is
not known to aggravate existing medical conditions.

Section IV.First Aid Measures
Eye ContactCheck for and remove any contact lenses. IMMEDIATELY flush eyes with runing water for at least 15 minutes. keeping
eyelids open. COLD water may be used. DO NOT use an eye oitment. Flush eyes with running water for a minimum of
15 minutes, occasionally lifting the upper eyelids. Seek medical attention. Treat symptomatically and supportively.
Skin ContactAfter contact with skin, wash immediately with plenty of water. Gently and thorough wash the contaminated skin with
running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. COLD water
may be used. Cover the irritated skin with an emollient. Seek medical attention. Treat symptomatically and supportively.
Wash any contaminated clothing before reusing.
InhalationIf the victim is not breathing, perform artificial respiration. Loosen tight clothing such as a collar, tie, belt or waistband. If
breathing is difficult, oxygen can be administered. Seek medical attention. Treat symptomatically and supportively.
IngestionINDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
Loosen tight clothing such as a collar, tie, belt, or waistband. If the victim is not breathing, administer artificial respiration.
Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material
was ingested; the absence of such signs, however, is not conclusive. Seek immediate medical attention and, if possible,
show the chemical label. Treat symptomatically and supportively.

Section V.Fire and Explosion Data
Auto-IgnitionNot available.
FlammabilityMay be combustible at high temperature.
Flash PointsFlammable LimitsNot available.
Not available.
Combustion ProductsThese products are toxic carbon oxides (CO, CO 2), sulfur oxides (SO2, SO3...), halogenated compounds.
Fire Hazards
No specific information is available regarding the flammability of this compound in the presence of various materials.
Explosion HazardsRisks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
No additional information is available regarding the risks of explosion.
Fire Fighting Media
SMALL FIRE: Use DRY chemicals, CO 2, water spray or foam.
and InstructionsLARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
Continued on Next Page
3353-89-7rrams (Europe)tio

Section VI.Accidental Release Measures
Spill CleanupIn case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and exercise caution. Use a
Instructionsshovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any
contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for assistance on
disposal.

Section VII. Handling and Storage
Handling and StorageKeep away from heat and sources of ignition. Mechanical exhaust required. When not in use, tightly seal the container
and store in a dry, cool place. Avoid excessive heat and light. DO NOT breathe dust.
Information
Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
Engineering ControlsUse process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal ProtectionSplash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult
a specialist BEFORE handling this product.
Exposure LimitsNot available.

Section IX. Physical and Chemical Properties
Solubility
Physical state @ 20°CWhite powder.Not available.
Not available.
Specific Gravity
Molecular Weight343.28Partition CoefficientNot available.
Boiling PointNot available.Vapor PressureNot available.
Melting PointNot available.Vapor DensityNot available.
Not available.VolatilityNot available.
Refractive Index
Critical TemperatureOdorNot available.
Not available.
Not available.Not available.
ViscosityTaste

Section X.Stability and Reactivity Data

This material is stable if stored under proper conditions. (See Section VII for instructions)
Stability
Conditions of Instability
Avoid excessive heat and light.
Incompatibilities
Reactive with oxidizing agents.

Section XI. Toxicological Information
RTECS NumberNot available.
Routes of ExposureEye contact. Ingestion. Inhalation.
Not available.
Toxicity Data
Chronic Toxic EffectsCARCINOGENIC EFFECTS : Not available.
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
There is no known effect from chronic exposure to this product. Repeated or prolonged exposure to this compound is not
known to aggravate existing medical conditions.
Acute Toxic EffectsNo specific information is available in our data base regarding the toxic effects of this material for humans. However,
exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling
this compound.
Continued on Next Page
Triphenylsulfonium Bromide

Section XII.Ecological Information
EcotoxicityNot available.
Environmental FateNot available.

Section XIII. Disposal Considerations
Recycle to process, if possible. Consult your local or regional authorities. You may be able to dissolve or mix material with
Waste Disposal
a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
federal, state, and local regulations when disposing of the substance.

Section XIV. Transport Information
DOT ClassificationNot a DOT controlled material (United States).
PIN NumberNot applicable.
Proper Shipping Name
Not applicable.
Packing Group (PG)Not applicable.
DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
TSCA Chemical InventoryThis product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40
CFR 720.36 (C) for those products not on the inventory list:
(EPA)
(i) These products are supplied solely for use in research and development by or under the supervision of a technically
qualified individual as defined in 40 CFR 720.0 et sec.
(ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
supplied on an MSDS sheet.
WHMIS ClassificationNot available.
(Canada)
EINECS Number (EEC) Not available.
EEC Risk StatementsNot available.


SECTION 16 - ADDITIONAL INFORMATION
N/A
HS Code 2930909090
HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%