SALP HYDRATE

Modify Date: 2024-01-13 10:42:32

SALP HYDRATE Structure
SALP HYDRATE structure
Common Name SALP HYDRATE
CAS Number 10305-76-7 Molecular Weight 958.94900
Density N/A Boiling Point N/A
Molecular Formula Al3H31NaO36P8 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name trialuminum,sodium,dihydrogen phosphate,hydrogen phosphate,tetrahydrate
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula Al3H31NaO36P8
Molecular Weight 958.94900
Exact Mass 958.78400
PSA 765.78000

 MSDS


Section 1. Chemical Product and Company Identification
Sodium aluminum phosphate - acidicCatalog
Common Name/
Number(s).
Trade Name
CAS#7785-88-8
Manufacturer
RTECSNot available.
SPECTRUM CHEMICAL MFG. CORP.
TSCATSCA 8(b) inventory: Sodium
aluminum phosphate - acidic
Commercial Name(s)Not available.
CI# Not available.
SynonymNot available.
IN CASE OF EMERGENCY
Not available.
Chemical Name
Chemical FamilyNot available.CALL (310) 516-8000
NaAl3H14(PO4)8.4H20
Chemical Formula
SPECTRUM CHEMICAL MFG. CORP.

Section 2.Composition and Information on Ingredients
Exposure Limits
TWA (mg/m3)STEL (mg/m3) CEIL (mg/m3)
NameCAS #% by Weight
1) Sodium aluminum phosphate - acidic7785-88-8100
Toxicological DataSodium aluminum phosphate - acidic
on IngredientsLD50: Not available.
LC50: Not available.

Section 3. Hazards Identification
Potential Acute Health Effects Hazardous in case of eye contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact
(irritant).
Potential Chronic HealthCARCINOGENIC EFFECTS: Not available.
EffectsMUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure is not known to aggravate medical condition.
Sodium aluminum phosphate - acidic

Section 4. First Aid Measures
Eye ContactCheck for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.
Skin ContactAfter contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin
with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin.
Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
Serious Skin ContactNot available.
InhalationAllow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious InhalationNot available.
IngestionDo not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not
breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion
Not available.

Section 5. Fire and Explosion Data
Flammability of the Product Non-flammable.
Auto-Ignition Temperature Not applicable.
Not applicable.
Flash Points
Not applicable.
Flammable Limits
Products of CombustionNot available.
Fire Hazards in Presence of Not applicable.
Various Substances
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
of Various SubstancesRisks of explosion of the product in presence of static discharge: Not available.
Fire Fighting MediaNot applicable.
and Instructions
Not available.
Special Remarks on
Fire Hazards
Special Remarks on Explosion Not available.
Hazards

Section 6. Accidental Release Measures
Small SpillUse appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and dispose of according to local and regional authority
requirements.
Large SpillUse a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
on the contaminated surface and allow to evacuate through the sanitary system.
Sodium aluminum phosphate - acidic

Section 7. Handling and Storage
PrecautionsDo not breathe dust. Avoid contact with eyes Wear suitable protective clothing In case of insufficient ventilation,
wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible.
StorageNo specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be
sure that it is not necessary to strain to reach materials, and that shelves are not overloaded.

Section 8. Exposure Controls/Personal Protection
Engineering ControlsUse process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal Protection
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Gloves.
Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
a Large Spillto avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
Exposure LimitsNot available.

Section 9. Physical and Chemical Properties
Physical state and appearance Solid. (Powdered solid.)OdorOdorless.
TasteNot available.
Molecular Weight949.88 g/mole
ColorWhite.
pH (1% soln/water)Not applicable.
Boiling PointNot available.
Melting PointDecomposes.
Critical TemperatureNot available.
Not available.
Specific Gravity
Vapor PressureNot applicable.
Vapor DensityNot available.
VolatilityNot available.
Odor ThresholdNot available.
Not available.
Water/Oil Dist. Coeff.
Ionicity (in Water)Not available.
Not available.
Dispersion Properties
SolubilityInsoluble in cold water.

Section 10. Stability and Reactivity Data
StabilityThe product is stable.
Not available.
Instability Temperature
Conditions of InstabilityNot available.
Incompatibility with variousNot available.
substances
CorrosivityNon-corrosive in presence of glass.
Sodium aluminum phosphate - acidic
Special Remarks onNot available.
Reactivity
Special Remarks onNot available.
Corrosivity
PolymerizationNo.

Section 11. Toxicological Information
Routes of EntryEye contact. Inhalation. Ingestion.
Toxicity to AnimalsLD50: Not available.
LC50: Not available.
Chronic Effects on Humans Not available.
Other Toxic Effects onHazardous in case of ingestion, of inhalation.
Humans
Slightly hazardous in case of skin contact (irritant).
Special Remarks onNot available.
Toxicity to Animals
Special Remarks on
Not available.
Chronic Effects on Humans
Special Remarks on otherNuisance dust.
Toxic Effects on Humans

Section 12. Ecological Information
Not available.
Ecotoxicity
BOD5 and CODNot available.
Products of BiodegradationPossibly hazardous short term degradation products are not likely. However, long term degradation products may
arise.
Toxicity of the ProductsThe products of degradation are as toxic as the original product.
of Biodegradation
Special Remarks on theNot available.
Products of Biodegradation

Section 13. Disposal Considerations
Waste Disposal

Section 14. Transport Information
DOT ClassificationNot a DOT controlled material (United States).
IdentificationNot applicable.
Special Provisions forNot applicable.
Transport
DOT (Pictograms)
Sodium aluminum phosphate - acidic

Section 15. Other Regulatory Information and Pictograms
TSCA 8(b) inventory: Sodium aluminum phosphate - acidic
Federal and State
Regulations
California
Proposition 65
Warnings
Other RegulationsNot available..
WHMIS (Canada) Not controlled under WHMIS (Canada).
Other Classifications
DSCL (EEC)R36- Irritating to eyes.
Health Hazard
HMIS (U.S.A.)2 National Fire Protection
0 Flammability
0 Association (U.S.A.)
Fire Hazard
2 0 Reactivity
Health
Reactivity
0
Specific hazard
Personal Protection
E
WHMIS (Canada)
(Pictograms)
DSCL (Europe)
(Pictograms)
TDG (Canada)
(Pictograms)
ADR (Europe)
(Pictograms)
Protective Equipment
Gloves.
Lab coat.
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent.
Splash goggles.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Synonyms

Sodium aluminum phosphate [HSDB]
UNII-7N091Y877O
Aluminium sodium phosphate
Sodium aluminium phosphate,acidic,tetrahydrate
Sodium aluminium phosphate,acidic