Diphenyl(1-pyrenyl)phosphine

Modify Date: 2024-01-08 23:58:58

Diphenyl(1-pyrenyl)phosphine Structure
Diphenyl(1-pyrenyl)phosphine structure
Common Name Diphenyl(1-pyrenyl)phosphine
CAS Number 110231-30-6 Molecular Weight 386.424
Density N/A Boiling Point 551.5±19.0 °C at 760 mmHg
Molecular Formula C28H19P Melting Point 174.0 to 178.0 °C
MSDS N/A Flash Point 305.8±27.8 °C

 Use of Diphenyl(1-pyrenyl)phosphine


Diphenyl-1-pyrenylphosphine (DPPP) is a fluoregenic peroxide reactive probe. Diphenyl-1-pyrenylphosphine exhibits a unique phototriggered aggregation-induced emission (AIE)/aggregation-induced quenching (ACQ) transition with a remarkable third-order nonlinear optical signal change[1].

 Names

Name Diphenyl-1-pyrenylphosphine
Synonym More Synonyms

 Diphenyl(1-pyrenyl)phosphine Biological Activity

Description Diphenyl-1-pyrenylphosphine (DPPP) is a fluoregenic peroxide reactive probe. Diphenyl-1-pyrenylphosphine exhibits a unique phototriggered aggregation-induced emission (AIE)/aggregation-induced quenching (ACQ) transition with a remarkable third-order nonlinear optical signal change[1].
Related Catalog
References

[1]. Xing C, et al Diphenyl-1-pyrenylphosphine: photo-triggered AIE/ACQ transition with remarkable third-order nonlinear optical signal change. Chem Commun (Camb). 2020 Apr 14;56(30):4220-4223.

 Chemical & Physical Properties

Boiling Point 551.5±19.0 °C at 760 mmHg
Melting Point 174.0 to 178.0 °C
Molecular Formula C28H19P
Molecular Weight 386.424
Flash Point 305.8±27.8 °C
Exact Mass 386.122437
PSA 13.59000
LogP 8.64
Vapour Pressure 0.0±1.4 mmHg at 25°C
Storage condition 0-10°C

 MSDS

Diphenyl-1-pyrenylphosphine Revision number: 5
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:Diphenyl-1-pyrenylphosphine

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementsCauses skin irritation
Causes serious eye irritation
Precautionary statements:
Wash hands thoroughly after handling.
[Prevention]
Wear protective gloves/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
[Response]
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:Diphenyl-1-pyrenylphosphine
Percent:>95.0%(GC)
CAS Number:110231-30-6
Synonyms:1-(Diphenylphosphino)pyrene , DPPP
C28H19P
Chemical Formula:

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Diphenyl-1-pyrenylphosphine

Section4. FIRST AID MEASURES
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Entry to non-involved personnel should be controlled around the leakage area by
emergency procedures: roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a local exhaust if dust or aerosol will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a refrigerator.
Store away from incompatible materials such as oxidizing agents.
Heat-sensitive
Packaging material:Comply with laws.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Install a closed system or local exhaust as possible so that workers should not be
Engineering controls:
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator. Follow local and national regulations.
Protective gloves.
Hand protection:
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Solid
Form:Crystal- Powder
Slightly pale yellow - Yellow green
Colour:
Diphenyl-1-pyrenylphosphine

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Odour:No data available
pH: No data available
Melting point/freezing point:176°C
Boiling point/range:No data available
Flash point:No data available
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Relative density:No data available
Solubility(ies):
[Water]No data available
[Other solvents]No data available

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Phosphorus oxides
products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
UN-No:Not listed
Diphenyl-1-pyrenylphosphine

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2931900090

 Customs

HS Code 2931900090
Summary 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%

 Synonyms

1-(Diphenylphosphino)pyrene
diphenyl(pyren-1-yl)phosphane
diphenyl-1-pyrenylphosphine
Diphenyl(pyren-1-yl)phosphine
Diphenyl(1-pyrenyl)phosphine
Phosphine, diphenyl-1-pyrenyl-
Top Suppliers:I want be here



Get all suppliers and price by the below link:

Diphenyl(1-pyrenyl)phosphine suppliers

Diphenyl(1-pyrenyl)phosphine price