strontium hydride

Modify Date: 2024-01-06 09:00:10

strontium hydride Structure
strontium hydride structure
Common Name strontium hydride
CAS Number 13598-33-9 Molecular Weight 87.62000
Density 3.260 Boiling Point N/A
Molecular Formula Sr Melting Point 1050°C
MSDS N/A Flash Point N/A

 Names

Name strontium hydride
Synonym More Synonyms

 Chemical & Physical Properties

Density 3.260
Melting Point 1050°C
Molecular Formula Sr
Molecular Weight 87.62000
Exact Mass 87.90560
Appearance of Characters Powder | gray

 MSDS


Section 1: Product Identification
Chemical Name:Strontium hydride (99.5%-Sr)
CAS Registry Number:13598-33-9
Formula:SrH2
EINECS Number:237-065-1
Chemical Family:metal hydride
Synonym:Strontium dihydride

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound13598-33-9100%no datano data

Section 3: Hazards Identification
Irritating to skin, eyes and respiratory tract. Inhalation of fine dust will cause severe irritation or caustic burns to
Emergency Overview:
respiratory system, skin and eyes.
Primary Routes of Exposure:Contact with skin and eyes. Inhalation of dust
Eye Contact:Corrosive to eyes. May cause severe eye damage.
Skin Contact:Causes severe irritation and chemical burns to the skin.
Inhalation:Harmful by inhalation. Dust causes severe irritation to the nose, mucous membranes and respiratory tract.
Ingestion:Harmful if swallowed. Material reacts with moisture causing chemical burns to the mouth and throat.
With moisture or human contact, hydride rapidly forms caustic alkali hydroxide with evolution of heat. Severe
Acute Health Affects:
irritation or chemical burns will result.
Chronic Health Affects:No information on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:Class D metal fire agent, dry salt, limestone or sand.
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire, burning hydride may produce alkaline fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: Flammable solid. Dust may form explosive mixtures with air. Evolves flammable hydrogen with water.

SECTION 6: Accidental Release Measures
Remove sources of ignition. Do not raise dust. Mix with vermiculite or other suitable dry adsorbent and sweep
Spill and Leak Procedures:
up.

SECTION 7: Handling and Storage
Store material in a tightly sealed container under an inert atmosphere of nitrogen or argon. Keep away from
Handling and Storage:
heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:-60mesh gray pwdr.
Molecular Weight:89.64
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:reacts with water

SECTION 10: Stability and Reactivity
Stability:moisture sensitive
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:contact with moisture and mineral acids. Reaction with mineral acids can release flammable hydrogen gas.
Incompatibility:mineral acids, water, oxidizing agents, alcohols, carbonyl compounds and halogens
Decomposition Products:hydrogen (in presence of moisture) and strontium oxide.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available.

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Metal hydrides, Water-reactive, N.O.S.
Hazard Class (CFR):4.3
Additional Hazard Class (CFR):NA
Packaging Group (CFR):I
UN ID Number (CFR):UN# 1409
Shipping Name (IATA):Metal hydrides, Water-reactive, N.O.S.
Hazard Class (IATA):4.3
Additional Hazard Class (IATA):NA
Packaging Group (IATA):I
UN ID Number (IATA):UN# 1409

SECTION 15: Regulatory Information
TSCA:Listed in the TSCA inventory
SARA (Title 313):Not reportable under SARA 313.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

RIDADR UN 1409
Packaging Group II
Hazard Class 4.3

 Synonyms

EINECS 237-065-1
Top Suppliers:I want be here


Get all suppliers and price by the below link:

strontium hydride suppliers

strontium hydride price