3',4'-DICHLORO[1,1'-BIPHENYL]-4-SULFONYL CHLORIDE structure
|
Common Name | 3',4'-DICHLORO[1,1'-BIPHENYL]-4-SULFONYL CHLORIDE | ||
---|---|---|---|---|
CAS Number | 501697-80-9 | Molecular Weight | 321.60700 | |
Density | 1.493g/cm3 | Boiling Point | 429.8ºC at 760 mmHg | |
Molecular Formula | C12H7Cl3O2S | Melting Point | 105ºC | |
MSDS | N/A | Flash Point | 213.7ºC |
Name | 4-(3,4-dichlorophenyl)benzenesulfonyl chloride |
---|---|
Synonym | More Synonyms |
Density | 1.493g/cm3 |
---|---|
Boiling Point | 429.8ºC at 760 mmHg |
Melting Point | 105ºC |
Molecular Formula | C12H7Cl3O2S |
Molecular Weight | 321.60700 |
Flash Point | 213.7ºC |
Exact Mass | 319.92300 |
PSA | 42.52000 |
LogP | 5.66870 |
Index of Refraction | 1.611 |
Synonym:None Known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 14 20/21/22 29 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Reacts violently with water. Harmful by inhalation, in contact with skin and if swallowed. Contact with water liberates toxic gas. Causes burns.Water-reactive. Potential Health Effects Eye: Causes eye burns. Skin: Harmful if absorbed through the skin. Causes skin burns. Ingestion: Harmful if swallowed. Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Harmful if inhaled. Chronic: Chronic exposure may cause effects similar to those of acute exposure. Section 4 - FIRST AID MEASURES Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately. Skin: If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil. In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid immediately. Wash clothing before reuse. Ingestion: If swallowed, do NOT induce vomiting. Get medical aid immediately. If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Extinguishing Media: DO NOT USE WATER! Do NOT get water inside containers. Contact professional fire-fighters immediately. Use dry chemical, dry sand, or carbon dioxide. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers. Vacuum or sweep up material and place into a suitable, dry disposal container. Section 7 - HANDLING and STORAGE Handling: Do not allow water to get into the container because of violent reaction. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam. Storage: Keep container closed when not in use. Keep away from water. Store under an inert atmosphere. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Exposure Limits CAS# 501697-80-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 104-105 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C12H7Cl3O2S Molecular Weight: 321.61 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Combines vigorously or explosively with water. Reacts with water to form hydrogen chloride, a toxic and corrosive gas. Conditions to Avoid: Dust generation, exposure to moist air or water. Incompatibilities with Other Materials: Oxidizing agents, bases, alcohols, amines, water. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide, chlorine. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 501697-80-9 unlisted. LD50/LC50: Not available. Carcinogenicity: 3',4'-Dichloro[1,1'-biphenyl]-4-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Ecotoxicity: Fish: Pseudomonas putida: Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, WATER REACTIVE, N.O.S. Hazard Class: 8 UN Number: 3096 Packing Group: II IMO Shipping Name: CORROSIVE SOLID, WATER REACTIVE, N.O.S. Hazard Class: 8 UN Number: 3096 Packing Group: II RID/ADR Shipping Name: CORROSIVE SOLID, WATER REACTIVE, N.O.S. Hazard Class: 8 UN Number: 3096 Packing group: II Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 14 Reacts violently with water. R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed. R 29 Contact with water liberates toxic gas. R 34 Causes burns. Safety Phrases: S 6 Keep under nitrogen. S 22 Do not breathe dust. S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 30 Never add water to this product. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 501697-80-9: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 501697-80-9 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 501697-80-9 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
HS Code | 2904909090 |
---|
HS Code | 2904909090 |
---|---|
Summary | HS:2904909090 sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
AR2090 |
3',4'-Dichloro-Biphenyl-4-Sulfonyl Chloride |