Ethyl 2-methyl-3-indolylglyoxylate

Modify Date: 2024-01-05 16:11:55

Ethyl 2-methyl-3-indolylglyoxylate Structure
Ethyl 2-methyl-3-indolylglyoxylate structure
Common Name Ethyl 2-methyl-3-indolylglyoxylate
CAS Number 6628-34-8 Molecular Weight 231.24700
Density 1.259g/cm3 Boiling Point 515.6ºC at 760 mmHg
Molecular Formula C13H13NO3 Melting Point 129.5°C (lit.)
MSDS N/A Flash Point 292.6ºC

 Names

Name ethyl 2-(2-methyl-1H-indol-3-yl)-2-oxoacetate
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.259g/cm3
Boiling Point 515.6ºC at 760 mmHg
Melting Point 129.5°C (lit.)
Molecular Formula C13H13NO3
Molecular Weight 231.24700
Flash Point 292.6ºC
Exact Mass 231.09000
PSA 59.16000
LogP 2.22210
Index of Refraction 1.589

 MSDS

Version 1.1
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameETHYL 2-METHYL-3-INDOLYLGLYOXY - 1 GM
LATE

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
ETHYL 2-METHYL-3-INDOLYLGLYOXYLATE 6628-34-8 NoneNone
FormulaC13H13NO3
Molecular Weight 231,2500 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

ALDRICHwww.molbase.com
EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Exercise appropriate precautions to minimize direct contact with
skin or eyes and prevent inhalation of dust.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection from nuisance levels of dusts are desired, use type N95
(US) or type P1 (EN 143) dust masks.
Hand Protection: Protective gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Solid
PropertyValueAt Temperature or Pressure
pHN/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
ALDRICHwww.molbase.com
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be harmful if inhaled.
Ingestion: May be harmful if swallowed.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information
ALDRICHwww.molbase.com

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2918300090

 Customs

HS Code 2918300090
Summary 2918300090 other carboxylic acids with aldehyde or ketone function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:6.5%。General tariff:30.0%

 Synonyms

Propionic acid anion
(2-methyl-indol-3-yl)-oxo-acetic acid ethyl ester
(2-Methyl-indol-3-yl)-glyoxylsaeure-aethylester
ethyl 2-methylindol-3-ylglyoxylate
ethyl (2-methyl-1H-indol-3-yl)(oxo)acetate
(2-Methyl-indolyl-3)-glyoxylsaeure-ethylester
(2-methyl-indol-3-yl)-glyoxylic acid ethyl ester
2-methylindole-3-ethylglyoxylate
Propanoic acid anion
Top Suppliers:I want be here

No recommended suppliers.

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3