2-(Aminomethyl)tetrahydropyran

Modify Date: 2024-01-02 13:49:43

2-(Aminomethyl)tetrahydropyran Structure
2-(Aminomethyl)tetrahydropyran structure
Common Name 2-(Aminomethyl)tetrahydropyran
CAS Number 6628-83-7 Molecular Weight 151.63400
Density 0.942g/cm3 Boiling Point 180.1ºC at 760 mmHg
Molecular Formula C6H14ClNO Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 2-(Aminomethyl)tetrahydropyran
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.942g/cm3
Boiling Point 180.1ºC at 760 mmHg
Molecular Formula C6H14ClNO
Molecular Weight 151.63400
Exact Mass 151.07600
PSA 35.25000
LogP 2.01650
Index of Refraction 1.45

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: Tetrahydropyran-2-ylmethylamine
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

Section3. Composition/information on ingredients.
Ingredient name:Tetrahydropyran-2-ylmethylamine
CAS number:6628-83-7

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels, refrigerated.
Storage:

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C6H13NO
Molecular weight:115.2

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
UP6475000
CHEMICAL NAME :
Pyran, 2-aminomethyltetrahydro-
CAS REGISTRY NUMBER :
6628-83-7
LAST UPDATED :
199509
DATA ITEMS CITED :
2
MOLECULAR FORMULA :
C6-H13-N-O
MOLECULAR WEIGHT :
115.20
WISWESSER LINE NOTATION :
T6OTJ B1Z

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Oral
SPECIES OBSERVED :
Rodent - rat
DOSE/DURATION :
710 uL/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
AIHAAP American Industrial Hygiene Association Journal. (AIHA, 475 Wolf Ledges Pkwy., Akron, OH 44311) V.19- 1958- Volume(issue)/page/year: 30,470,1969
TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Administration onto the skin
SPECIES OBSERVED :
Rodent - rabbit
DOSE/DURATION :
710 uL/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
AIHAAP American Industrial Hygiene Association Journal. (AIHA, 475 Wolf Ledges Pkwy., Akron, OH 44311) V.19- 1958- Volume(issue)/page/year: 30,470,1969

 Safety Information

HS Code 2932999099

 Synthetic Route

~%

2-(Aminomethyl)tetrahydropyran Structure

2-(Aminomethyl)...

CAS#:6628-83-7

Literature: WO2005/66126 A1, ; Page/Page column 69 ; WO 2005/066126 A1

~%

2-(Aminomethyl)tetrahydropyran Structure

2-(Aminomethyl)...

CAS#:6628-83-7

Literature: Journal of Medicinal Chemistry, , vol. 50, # 20 p. 4898 - 4908

~%

2-(Aminomethyl)tetrahydropyran Structure

2-(Aminomethyl)...

CAS#:6628-83-7

Literature: Journal of the American Chemical Society, , vol. 74, p. 1504

 Customs

HS Code 2932999099
Summary 2932999099. other heterocyclic compounds with oxygen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Synonyms

oxan-2-ylmethanamine