前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里



查看所有供应商和价格请点击:

14491-66-8生产厂家

14491-66-8价格

14491-66-8

14491-66-8结构式
14491-66-8结构式
  • 常用中文名:癸二酸二正辛酯
  • 常用英文名:Dioctyl succinate
  • CAS号:14491-66-8
  • 分子式:C26H50O4
  • 分子量:426.673
  • 发布时间:2018-06-11 11:09:50
  • 更新时间:2024-01-10 14:28:36

化源商城直购

中文名 皮脂酸二辛酯
英文名 di-n-octyl succinate
中文别名 癸二酸二正辛酯
英文别名 Decanedioic acid, dioctyl ester
Dioctyl butanedioate
Dioctyl sebacate
Di-n-octyl Sebacate
Decanedioic acid dioctyl ester
dioctyl decanedioate
Octyl sebacate
Succinic acid, dioctyl ester
Dioctyl succinate
Sebacic acid, dioctyl ester
Butanedioic acid, dioctyl ester
密度 0.9±0.1 g/cm3
沸点 442.0±13.0 °C at 760 mmHg
分子式 C26H50O4
分子量 426.673
闪点 198.4±18.2 °C
精确质量 426.370911
PSA 52.60000
LogP 10.23
蒸汽压 0.0±1.1 mmHg at 25°C
折射率 1.455
储存条件 室温

Section I.Chemical Product and Company Identification
Chemical Name Di-n-octyl Sebacate
Portland OR
SynonymDecanedioic acid, 1,10-diisooctyl ester (CA INDEX
NAME);
Decanedioic Acid Di-n-octyl Ester;
Di-n-octyl Decanedioate;
Sebacic Acid Di-n-octyl Ester
Chemical FormulaC26H50O4
CAS Number14491-66-8

Section II.Composition and Information on Ingredients
Chemical NameCAS Number Percent (%)TLV/PELToxicology Data
Di-n-octyl Sebacate14491-66-8 Min. 95.0 (GC) Not available.Not available.

Section III. Hazards Identification
No specific information is available in our data base regarding the toxic effects of this material for humans. However,
Acute Health Effects
exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling
this compound.
Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
CARCINOGENIC EFFECTS : Not available.
Chronic Health Effects
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.First Aid Measures
Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention.
Skin ContactIn case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing
before reuse. Thoroughly clean shoes before reuse. Get medical attention.
InhalationIf the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
improve.
INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
Ingestion
Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
material was ingested; the absence of such signs, however, is not conclusive.

Section V.Fire and Explosion Data
Not available.
FlammabilityMay be combustible at high temperature.Auto-Ignition
Flash PointsNot available.Flammable LimitsNot available.
Combustion ProductsThese products are toxic carbon oxides (CO, CO2).
Fire Hazards
Not available.
Risks of explosion of the product in presence of mechanical impact: Not available.
Explosion Hazards
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting MediaSMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
and Instructions
Consult with local fire authorities before attempting large scale fire-fighting operations.
Continued on Next Page
Di-n-octyl Sebacate

Section VI.Accidental Release Measures
Spill CleanupIf the product is in its solid form: Use a shovel to put the material into a convenient waste disposal container. If the product is
in its liquid form: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning
Instructions
the spill by rinsing any contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities
for assistance on disposal.

Section VII. Handling and Storage
Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a dry, cool
Handling and Storage
place. Avoid excessive heat and light. Do not breathe gas/fumes/ vapor/spray.
Information
Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
Engineering Controls
threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.
Splash goggles. Lab coat. Vapor respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
Personal Protection
specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
Exposure LimitsNot available.

Section IX. Physical and Chemical Properties
Liquid. (Clear, colorless.)Solubility
Physical state @ 20°CNot available.
0.91 (water=1)
Specific Gravity
Molecular Weight426.67Partition Coefficient
Not available.
Boiling Point225°C (437°F) @ 2 mmHgVapor PressureNot available.
19°C (66.2°F) (freezing point)14.7 (Air = 1)
Melting PointVapor Density
Refractive IndexNot available.VolatilityNot available.
Not available.Odorless.
Critical TemperatureOdor
ViscosityNot available.TasteNot available.

Section X.Stability and Reactivity Data

This material is stable if stored under proper conditions. (See Section VII for instructions)
Stability
Conditions of InstabilityAvoid excessive heat and light.
Incompatibilities
Reactive with oxidizing agents.

Section XI. Toxicological Information
Not available.
RTECS Number
Eye Contact. Ingestion. Inhalation.
Routes of Exposure
Not available.
Toxicity Data
Chronic Toxic EffectsCARCINOGENIC EFFECTS : Not available.
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
No specific information is available in our data base regarding the toxic effects of this material for humans. However,
Acute Toxic Effects
exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this
compound.
Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

Section XII.Ecological Information
Not available.
Ecotoxicity
Not available.
Environmental Fate
Continued on Next Page
Di-n-octyl Sebacate

Section XIII. Disposal Considerations
Waste DisposalRecycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
Not a DOT controlled material (United States).
DOT Classification
PIN NumberNot applicable.
Proper Shipping NameNot applicable.
Packing Group (PG)Not applicable.
DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
TSCA Chemical InventoryThis compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list.
(EPA)
WHMIS ClassificationOn DSL
(Canada)
EINECS Number (EEC) 248-333-2
EEC Risk StatementsNot available.


SECTION 16 - ADDITIONAL INFORMATION
N/A
上游产品  0

下游产品  1