查看所有供应商和价格请点击：
| 中文名 | 司班65 |
|---|---|
| 英文名 | sorbitan tristearate |
| 中文别名 |
司本65
山梨醇酐三硬脂酸酯 硬脂酸山梨糖醇酐酯 山梨糖醇酐三硬脂酸酯 斯盘65 S-65乳化剂 乳化剂S-65 脱水山梨醇三硬脂酸酯 司盘65 山梨醇三硬脂酸酯 三硬脂山梨坦 |
| 英文别名 |
Glycomul(R) TS KFG
SPAN 65 EmulsifierS65 SPAN(R) 65 SPAN(TM) 65 Lonzest(R) STS Sorbitantristearat EMALEX EG-2854-S MFCD00151165 EINECS 247-891-4 |
| 描述 | 山梨醇三硬脂酸酯是一种非离子表面活性剂,对皮肤渗透性具有协同作用。山梨醇三硬脂酸酯可用作辅料,如乳化剂。药用辅料,或称药用辅料,是指除药物成分外,在制药过程中使用的其他化学物质。药用辅料一般是指药物制剂中的非活性成分,可以提高药物制剂的稳定性、溶解性和加工性。药用辅料也会影响联合给药药物的吸收、分布、代谢和消除(ADME)过程[1][2]。 |
|---|---|
| 相关类别 | |
| 参考文献 |
| 密度 | 0.96 g/cm3 |
|---|---|
| 沸点 | 885.4ºC at 760 mmHg |
| 分子式 | C60H114O8 |
| 分子量 | 963.54200 |
| 闪点 | 150 °C |
| 精确质量 | 962.85100 |
| PSA | 108.36000 |
| LogP | 17.89740 |
| 外观性状 | 一种淡奶油色至黄褐色的蜡质固体,带有一种淡特有的气味和温和的味道 |
| 蒸汽压 | 0mmHg at 25°C |
| 折射率 | 1.478 |
| 储存条件 | 放入紧密的贮藏器内，储存在阴凉，干燥的地方 |
| 稳定性 | 常温常压下稳定 避免接触强氧化剂 |
| 分子结构 | 1、 摩尔折射率：286.61 2、 摩尔体积（cm3/mol）：994.4 3、 等张比容（90.2K）：2510.4 4、 表面张力（dyne/cm）：40.6 5、 极化率（10-24cm3）：113.62 |
| 计算化学 | 1、 疏水参数计算参考值（XlogP）：24.3 2、 氢键供体数量：1 3、 氢键受体数量：8 4、 可旋转化学键数量：56 5、 拓扑分子极性表面积（TPSA）：108 6、 重原子数：68 7、 表面电荷：0 8、 复杂度：1100 9、 同位素原子数量：0 10、确定原子立构中心数量：3 11、不确定原子立构中心数量：1 12、确定化学键立构中心数量：0 13、不确定化学键立构中心数量：0 14、共价键单元数量：1 |
| 更多 | 1. 性状：蜡黄色固体 2. 密度（g/mL,25/4℃）：未确定 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：50-56 5. 沸点（ºC,常压）：未确定 6. 沸点（ºC,5.2kPa）：未确定 7. 折射率：未确定 8. 闪点（ºC）：未确定 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：未确定 11. 蒸气压（kpa,20ºC）：未确定 12. 饱和蒸气压（kPa,60ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性：少量溶解于异丙醇、四氯乙烯、二甲苯中 |
|
Section 1. Chemical Product and Company Identification Sorbitan tristearate Common Name/ Trade Name Manufacturer Commercial Name(s) Synonym
Chemical Name Chemical Family Sorbitan tristearate Section 4. First Aid Measures Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs. Skin ContactWash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Serious Skin ContactNot available. InhalationIf inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Serious InhalationNot available. IngestionDo NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband. Serious IngestionNot available. Section 5. Fire and Explosion Data Flammability of the Product May be combustible at high temperature. Auto-Ignition Temperature Not available. Flash PointsCLOSED CUP: 150°C (302°F). Flammable LimitsNot available. Products of CombustionNot available. Fire Hazards in Presence of Slightly flammable to flammable in presence of open flames and sparks, of heat. Various Substances Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available. of Various SubstancesRisks of explosion of the product in presence of static discharge: Not available. Fire Fighting MediaSMALL FIRE: Use DRY chemical powder. and InstructionsLARGE FIRE: Use water spray, fog or foam. Do not use water jet. Special Remarks onNot available. Fire Hazards Special Remarks on Explosion Not available. Hazards Section 6. Accidental Release Measures Small SpillAbsorb with an inert material and put the spilled material in an appropriate waste disposal. Large SpillAbsorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Section 7. Handling and Storage PrecautionsKeep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe gas/fumes/ vapor/spray. Keep container tightly closed. Keep container in a cool, well-ventilated area. Storage Sorbitan tristearate Section 8. Exposure Controls/Personal Protection Engineering ControlsProvide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. Personal ProtectionSafety glasses. Synthetic apron. Gloves (impervious). Respiratory protection is not necessary for normal handling. Good room ventilation or use of local exhaust (fume hood) is sufficient. Use a vapor respirator under conditions where exposure to the substance is apparent (e.g. generation of high concentrations of mist or vapor, inadequate ventilation, development of respiratory tract irritation), and engineering controls are not feasible. Be sure to use an approved/certified respirator or equivalent. Personal Protection in Case of Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a a Large Spillspecialist BEFORE handling this product. Exposure LimitsNot available. Section 9. Physical and Chemical Properties Physical state and appearance Liquid.OdorNot available. TasteNot available. Molecular WeightNot available. Not available. Color pH (1% soln/water)Not applicable. Boiling PointNot available. Decomposes. Melting Point Critical TemperatureNot available. 0.95-0.98 (Water = 1) Specific Gravity Vapor PressureNot available. Vapor DensityNot available. VolatilityNot available. Odor ThresholdNot available. Not available. Water/Oil Dist. Coeff. Ionicity (in Water)Not available. Dispersion PropertiesNot available. SolubilityInsoluble in cold water. Section 10. Stability and Reactivity Data StabilityThe product is stable. Not available. Instability Temperature Conditions of InstabilityExcess heat, incompatible materials Incompatibility with variousReactive with oxidizing agents. substances CorrosivityNon-corrosive in presence of glass. Not available. Special Remarks on Reactivity Special Remarks onNot available. Corrosivity PolymerizationWill not occur. Sorbitan tristearate Section 11. Toxicological Information Routes of EntryInhalation. Ingestion. Toxicity to AnimalsLD50: Not available. LC50: Not available. Chronic Effects on Humans Not available. Other Toxic Effects on Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation. Humans Special Remarks onNot available. Toxicity to Animals Special Remarks onNot available. Chronic Effects on Humans Special Remarks on otherAcute Potential Health Effects: Toxic Effects on HumansSkin: May cause skin irritation. Eyes: May cause eye irritation. Inhalation: May cause respiratory tract irritation. Ingestion: May cause digestive tract irritation. Section 12. Ecological Information EcotoxicityNot available. BOD5 and CODNot available. Products of BiodegradationPossibly hazardous short term degradation products are not likely. However, long term degradation products may arise. Toxicity of the ProductsNot available. of Biodegradation Special Remarks on theNot available. Products of Biodegradation Section 13. Disposal Considerations Waste DisposalWaste must be disposed of in accordance with federal, state and local environmental control regulations. Section 14. Transport Information DOT ClassificationNot a DOT controlled material (United States). Not applicable. Identification Special Provisions forNot applicable. Transport DOT (Pictograms) Sorbitan tristearate Section 15. Other Regulatory Information and Pictograms TSCA 8(b) inventory: Sorbitan tristearate Federal and State Regulations CaliforniaCalifornia prop. 65: This product contains the following ingredients for which the State of California has Proposition 65found to cause cancer which would require a warning under the statute: No products were found. Warnings California prop. 65: This product contains the following ingredients for which the State of California has found to cause birth defects which would require a warning under the statute: No products were found. Other RegulationsEINECS: This product is on the European Inventory of Existing Commercial Chemical Substances (EINECS No. 247-891-4). Canada: Listed on Canadian Domestic Substance List (DSL). China: Listed on National Inventory. Japan: Listed on National Inventory (ENCS). Korea: Listed on National Inventory (KECI). Philippines: Listed on National Inventory (PICCS). Australia: Listed on AICS. Other ClassificationsWHMIS (Canada) Not controlled under WHMIS (Canada). DSCL (EEC)This product is not classifiedNot applicable. according to the EU regulations. Health Hazard HMIS (U.S.A.)2 National Fire Protection 1 Flammability 1 Association (U.S.A.) Fire Hazard 1 0 Reactivity Health Reactivity 1 Specific hazard Personal Protection a WHMIS (Canada) (Pictograms) DSCL (Europe) (Pictograms) TDG (Canada) (Pictograms) ADR (Europe) (Pictograms) Protective Equipment Gloves (impervious). Lab coat. Not applicable. Safety glasses. SECTION 16 - ADDITIONAL INFORMATION N/A |
| 个人防护装备 | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
|---|---|
| 危害码 (欧洲) | Xi |
| 危险品运输编码 | NONH for all modes of transport |
| WGK德国 | 1 |
1.将1 mol山梨糖醇投入反应釜中，抽真空升温脱水，脱水完毕后压入熔化的硬脂酸3 mol，氢氧化钠催化剂1 kg。在减压条件下缓慢升温，2 h内升至180℃，然后每1 h升10℃，3 h后升温至210℃，在210℃下保温5 h，再升至220℃，反应1 h，取样测酸值，当酸值到13～15为合格，停止酯化。静置，冷却过夜，除去下层焦化物，上层用适量的双氧水脱色，最后升温至100℃，热压成型，冷却包装即为成品。反应如下：
