122049-54-1

• 常用中文名：苯丙酮酸钠一水合物
• 常用英文名：Phenylpyruvic acid sodium salt monohydrate
• CAS号：122049-54-1
• 分子式：C₉H₉NaO₄
• 分子量：204.155
• 相关类别： 化学试剂 有机试剂 芳香酮
• 发布时间：2018-05-18 08:00:00
• 更新时间：2024-01-06 21:31:26

名称

• 中文名: 苯丙酮酸钠一水合物
• 英文名: Phenylpyruvic acid, sodium salt monohydrate
• 中文别名: 苯基丙酮酸钠单水合物; 苯丙酮酸钠,一水合物
• 英文别名: Benzenepropanoic acid, α-oxo-, sodium salt, hydrate (1:1:1); MFCD00149109; Phenylpyruvic acid sodium salt monohydrate; Sodium 2-oxo-3-phenylpropanoate hydrate (1:1:1); Phenylpyruvic acid,sodium salt monohydrate; Sodium 2-oxo-3-phenylpropanoate hydrate; EINECS 204-053-2

物化性质

• 沸点: 299.1ºC at 760 mmHg
• 熔点: >300ºC
• 分子式: C₉H₉NaO₄
• 分子量: 204.155
• 闪点: 148.9ºC
• 精确质量: 204.039856
• PSA: 66.43000
• 外观性状: 白色细粉末
• 蒸汽压: 0.000546mmHg at 25°C
• 储存条件:

  保持贮藏器密封、储存在阴凉、干燥的地方，确保工作间有良好的通风或排气装置

• 稳定性:

  如果遵照规格使用和储存则不会分解，未有已知危险反应

  避免氧化物
• 水溶解性: Soluble in water.
• 分子结构:

  1、摩尔折射率：无可用的

  2、摩尔体积（cm³/mol）：无可用的

  3、等张比容（90.2K）：无可用的

  4、表面张力（dyne/cm）：无可用的

  5、介电常数：无可用的

  6、极化率（10^-24cm³）：无可用的

  7、单一同位素质量：204.039854 Da

  8、标称质量：204 Da

  9、平均质量：204.1551 Da

• 计算化学:

  1、 疏水参数计算参考值（XlogP）：1.9

  2、 氢键供体数量：0

  3、 氢键受体数量：3

  4、 可旋转化学键数量：2

  5、 互变异构体数量：2

  6、 拓扑分子极性表面积（TPSA）：57.2

  7、 重原子数量：12

  8、 表面电荷：-1

  9、 复杂度：175

  10、同位素原子数量：0

  11、确定原子立构中心数量：0

  12、不确定原子立构中心数量：0

  13、确定化学键立构中心数量：0

  14、不确定化学键立构中心数量：0

  15、共价键单元数量：1

• 更多:

  1. 性状：白色或奶油色的粉末

  2. 密度（g/mL,20℃）：未确定

  3. 相对蒸汽密度（g/mL,空气=1）：未确定

  4. 熔点（ºC）：>300

  5. 沸点（ºC,常压）：未确定

  6. 沸点（ºC,KPa）：未确定

  7. 折射率：未确定

  8. 闪点（ºC）：未确定

  9. 比旋光度（º）：未确定

  10. 自燃点或引燃温度（ºC）：未确定

  11. 蒸气压（Pa,20ºC）：未确定

  12. 饱和蒸气压（KPa,20ºC）：未确定

  13. 燃烧热（KJ/mol）：未确定

  14. 临界温度（ºC）：未确定

  15. 临界压力（KPa）：未确定

  16. 油水（辛醇/水）分配系数的对数值：未确定

  17. 爆炸上限（%,V/V）：未确定

  18. 爆炸下限（%,V/V）：未确定

  19. 溶解性：可溶于水

MSDS

Name: Phenylpyruvic Acid Sodium Salt Mono-Hydrate 98% Material Safety Data Sheet Synonym: None Known CAS: 122049-54-1 Section 1 - Chemical Product MSDS Name:Phenylpyruvic Acid Sodium Salt Mono-Hydrate 98% Material Safety Data Sheet Synonym:None Known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS CAS# Chemical Name content EINECS# 122049-54-1 Phenylpyruvic Acid, Sodium Salt Mono-H 98% unlisted Hazard Symbols: None Listed. Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed. Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled. Chronic: No information found. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Storage: Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 122049-54-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Color: white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: Not available. Autoignition Temperature: Not applicable. Flash Point: Not applicable. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C9H7O3Na.H2O Molecular Weight: 204.16 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Dust generation. Incompatibilities with Other Materials: Oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 122049-54-1 unlisted. LD50/LC50: Not available. Carcinogenicity: Phenylpyruvic Acid, Sodium Salt Mono-Hydrate - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: IMO Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: RID/ADR Shipping Name: Not regulated. Hazard Class: UN Number: Packing group: Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 122049-54-1: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 122049-54-1 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 122049-54-1 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A

毒性和生态

生态学数据: 通常对水是稍微有危害的，若无政府许可，勿将材料排入周围环境。

安全

• 安全声明 (欧洲): S22-S24/25
• 海关编码: 29183000