前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里




查看所有供应商和价格请点击:

52785-06-5生产厂家

52785-06-5价格

52785-06-5

52785-06-5结构式
52785-06-5结构式
  • 常用中文名:二氧化铂
  • 常用英文名:Dioxoplatinum
  • CAS号:52785-06-5
  • 分子式:O2Pt
  • 分子量:227.083
  • 相关类别: 无机化工 无机盐 稀土金属、钇或钪的氧化物
  • 发布时间:2018-09-01 20:01:59
  • 更新时间:2024-01-02 11:08:03
  • 【用途一】
    1、加氢催化剂,适用于双键、三键、芳香烃、羰基、腈、硝基还原作用2、优良吸氢材料3、电子工业中低阻值范围的电阻4、电位器等元件配料用原料和电子工业厚膜线路材料

化源商城直购

中文名 二氧化铂
英文名 Platinum(IV) oxide hydrate
中文别名 氧化铂(IV)水合物
英文别名 Platinum dioxide
Platinum, dioxo-
Dioxoplatinum
EINECS 215-223-0
Platinum(IV) oxide
MFCD00066964
密度 10.2
熔点 450 °C(lit.)
分子式 O2Pt
分子量 227.083
精确质量 226.954636
储存条件

保持贮藏器密封、储存在阴凉、干燥的地方,确保工作间有良好的通风或排气装置

稳定性

如果遵照规格使用和储存则不会分解,未有已知危险反应

水溶解性 INSOLUBLE
计算化学

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:1

3.氢键受体数量:3

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积35.1

7.重原子数量:4

8.表面电荷:0

9.复杂度:18.3

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

更多

1. 性状:粉末

2. 密度(g/mL,25ºC):10.2

3. 相对蒸汽密度(g/mL,空气=1): 未确定

4. 熔点(ºC): 450

5. 沸点(ºC):未确定

6. 沸点(ºC,24mm hg):未确定

7. 折射率:未确定

8. 闪点(°C):未确定

9. 比旋光度(ºC):未确定

10. 自燃点或引燃温度(ºC): 未确定

11. 蒸气压(kPa,20ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性: 不能溶解于水的


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Platinum(IV) oxide hydrate
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 52785-06-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Oxidizing solids (Category 2), H272
Eye irritation (Category 2), H319
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
O, Xi Oxidising, IrritantR 8, R36
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H272May intensify fire; oxidiser.
H319Causes serious eye irritation.
Precautionary statement(s)
P220Keep/Store away from clothing/ combustible materials.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Natural product
Formula: O2Pt · xH2O
Molecular Weight: 227,08 g/mol
CAS-No.: 52785-06-5
EC-No.: 215-223-0
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Platinum dioxide
CAS-No.52785-06-5Ox. Sol. 2; Eye Irrit. 2; H272,<= 100 %
EC-No.215-223-0H319
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Platinum dioxide
CAS-No.52785-06-5O, Xi, R 8 - R36<= 100 %
EC-No.215-223-0
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or
by wet-brushing and place in container for disposal according to local regulations (see section 13). Keep
in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition
- No smoking.Keep away from heat and sources of ignition.Normal measures for preventive fire protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: powder
Colour: dark brown
b) Odourno data available
c) Odour Thresholdno data available
d) pH10,0 - 11,0
e) Melting point/freezingMelting point/range: 450 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash pointnot applicable
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityinsoluble
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesThe substance or mixture is classified as oxidizing with the category 2.
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Organic materials, Powdered metals
Hazardous decomposition products
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company. Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 1479IMDG: 1479IATA: 1479
UN proper shipping name
ADR/RID: OXIDIZING SOLID, N.O.S. (Platinum dioxide)
IMDG: OXIDIZING SOLID, N.O.S. (Platinum dioxide)
IATA:Oxidizing solid, n.o.s. (Platinum dioxide)
Transport hazard class(es)
ADR/RID: 5.1IMDG: 5.1IATA: 5.1
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: yesIMDG Marine pollutant: yesIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

通常来说对水是无害的,若无政府许可,勿将材料排入周围环境。

符号 GHS03 GHS07
GHS03, GHS07
信号词 Danger
危害声明 H272-H319
警示性声明 P220-P305 + P351 + P338
个人防护装备 Eyeshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
危害码 (欧洲) O:Oxidizingagent;Xi:Irritant;
风险声明 (欧洲) R38;R41;R8
安全声明 (欧洲) S26-S36/37/39-S28A-S22-S17
危险品运输编码 UN 1479 5.1/PG 2
WGK德国 2
包装等级 II
危险类别 5.1