品牌现货直购
供应商:我要出现这里




查看所有供应商和价格请点击:

25736-86-1生产厂家

25736-86-1价格

25736-86-1

25736-86-1结构式
25736-86-1结构式

化源商城直购

中文名 聚乙二醇甲基丙烯酸酯
英文名 poly(ethylene glycol) (n) monomethacrylate
中文别名 α-(2-甲基-2-丙烯酰基)-ω-甲氧基-聚乙二醇,甲氧基聚乙二醇的甲基丙烯酸酯
α-(2-甲基-2-丙烯酰基)-ω-甲氧基-聚乙二醇
聚乙二醇单甲醚单甲基丙烯酸酯
甲氧基聚乙二醇的甲基丙烯酸酯
聚(乙二醇)甲基丙烯酸酯
英文别名 POLYETHYLENE GLYCOL 8000 MONOMETHACRYLATE
Methacrylicacid,polyethyleneglycolmonoester
POLYETHYLENE GLYCOL 2000 MONOMETHACRYLATE
ETHOXYLATEDHYDROXYETHYLMETHACRYLATE
POLYETHYLENE GLYCOL 4000 MONOMETHACRYLATE
POLYETHYLENE GLYCOL 3000 MONOMETHACRYLATE
POLYETHYLENE GLYCOL 1000 MONOMETHACRYLATE
密度 1.105 g/mL at 25ºC
沸点 >300ºC
分子式 C24H46O12
分子量 526.61500
闪点 >230 °F
精确质量 526.29900
PSA 129.60000
LogP 0.24740
外观性状 无色 液体
折射率 n20/D 1.467
储存条件

密封于阴凉干燥环境中

稳定性

遵照规定使用和储存则不会分解。

分子结构

1、摩尔折射率:无可用

2、 摩尔体积(cm3/mol):无可用

3、 等张比容(90.2K):无可用

4、 表面张力(dyne/cm):无可用

5、 极化率:无可用

计算化学

1、 疏水参数计算参考值(XlogP):0.5

2、 氢键供体数量:1

3、 氢键受体数量:3

4、 可旋转化学键数量:4

5、 拓扑分子极性表面积(TPSA):46.5

6、 重原子数量:9

7、 表面电荷:0

8、 复杂度:118

9、 同位素原子数量:0

10、 确定原子立构中心数量:0

11、 不确定原子立构中心数量:0

12、 确定化学键立构中心数量:0

13、 不确定化学键立构中心数量:0

14、 共价键单元数量:1

更多

1. 性状:无可用

2. 密度(g/mL,25/4℃):1.105

3. 相对蒸汽密度(g/mL,空气=1):无可用

4. 熔点(ºC):无可用

5. 沸点(ºC,常压):大于300

6. 沸点(ºC,5.2kPa):无可用

7. 折射率:1.467

8. 闪点(ºC):大于113

9. 比旋光度(º):无可用

10. 自燃点或引燃温度(ºC):无可用

11. 蒸气压(kPa,25ºC):无可用

12. 饱和蒸气压(kPa,60ºC):无可用

13. 燃烧热(KJ/mol):无可用

14. 临界温度(ºC):无可用

15. 临界压力(KPa):无可用

16. 油水(辛醇/水)分配系数的对数值:无可用

17. 爆炸上限(%,V/V):无可用

18. 爆炸下限(%,V/V):无可用

19. 溶解性:无可用


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Poly(ethylene glycol) methacrylate
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 25736-86-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi IrritantR38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordWarning
Hazard statement(s)
H315Causes skin irritation.
Precautionary statement(s)none
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Formula: H2C=C(CH3)CO(OCH2CH2)nOH
CAS-No.: 25736-86-1
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Poly(ethylene glycol) methacrylate
CAS-No.25736-86-1Skin Irrit. 2; H315<= 100 %
EC-No.500-042-4
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
May darken on storage
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point113 °C - closed cup
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density1,101 g/mL at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Contains the following stabiliser(s):
Mequinol (900 ppm)
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong bases, Polymerizing initiators, Peroxides, Strong oxidizing agents, Copper, Steel (all types and
surface treatments), Iron and iron salts.
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

该物质对环境可能有危害,对水体应给予特别注意。

符号 GHS07
GHS07
信号词 Warning
危害声明 H315
个人防护装备 Eyeshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
危害码 (欧洲) Xi
风险声明 (欧洲) R38
安全声明 (欧洲) 26-36/37/39
危险品运输编码 NONH for all modes of transport
WGK德国 3