50629-14-6
50629-14-6结构式
| 中文名 | 苯甲醚-D5 |
|---|---|
| 英文名 | 1,2,3,4,5-pentadeuterio-6-methoxybenzene |
| 英文别名 |
Methoxybenzene
Ether, methyl phenyl 2,3,4,5,6-pentadeuterio-anisole pentadeuterio-methoxy-benzene Methoxy(benzene-d5) Phenol methyl ether 2,3,4,5,6-pentadeuteroanisole Phenoxymethane Anisole-2,3,4,5,6-d5 Anisole 506892 Benzene, methoxy 2,3,4,5,6-pentadeuterio-1-methoxybenzene 4-methoxybenzene Methyl phenyl ether 4-06-00-00548 MFCD00008354 Benzene, methoxy- methoxy benzene |
| 密度 | 1.0±0.1 g/cm3 |
|---|---|
| 沸点 | 153.6±0.0 °C at 760 mmHg |
| 分子式 | C7H8O |
| 分子量 | 108.138 |
| 闪点 | 51.7±0.0 °C |
| 精确质量 | 108.057518 |
| PSA | 9.23000 |
| LogP | 2.13 |
| 蒸汽压 | 4.2±0.2 mmHg at 25°C |
| 折射率 | 1.492 |
|
SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name: Anisole-2,3,4,5,6-d5 REACH No.: A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
CAS-No.: 50629-14-6 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Specific target organ toxicity - single exposure (Category 3), H335 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC Xi IrritantR10, R36/37/38 For the full text of the R-phrases mentioned in this Section, see Section 16. Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal wordWarning Hazard statement(s) H315Causes skin irritation. H319Causes serious eye irritation. H335May cause respiratory irritation. Precautionary statement(s) P261Avoid breathing vapours. P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazardnone Statements Other hazards - none SECTION 3: Composition/information on ingredients Substances Chemical characterization : Isotopically labeled Synonyms: Methoxy(benzene-d5) Methoxy(benzene-d5) Formula: C7D5H3O Molecular Weight: 113,17 g/mol CAS-No.: 50629-14-6 Hazardous ingredients according to Regulation (EC) No 1272/2008 ComponentClassificationConcentration Anisole-2,3,4,5,6-d5 Skin Irrit. 2; Eye Irrit. 2; STOT - SE 3; H315, H319, H335 Hazardous ingredients according to Directive 1999/45/EC ComponentClassificationConcentration Anisole-2,3,4,5,6-d5 Xi, R10 - R36/37/38- For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 SECTION 4: First aid measures Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store under inert gas. hygroscopic Specific end use(s) A part from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Do not let product enter drains. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) AppearanceForm: liquid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingMelting point/range: -37 °C - lit. point f) Initial boiling point and 154 °C - lit. boiling range g) Flash pointno data available h) Evapouration rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative density1,04 g/mL at 25 °C1,04 g/cm3 at 25 °C n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available SECTION 10: Stability and reactivity Reactivity no data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation Respiratory or skin sensitisation no data available Germ cell mutagenicity Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity Specific target organ toxicity - single exposure Inhalation - May cause respiratory irritation. Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. SECTION 12: Ecological information Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other adverse effects no data available SECTION 13: Disposal considerations Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: 2222IMDG: 2222IATA: 2222 UN proper shipping name ADR/RID: ANISOLE IMDG: ANISOLE IATA:Anisole Transport hazard class(es) ADR/RID: 3IMDG: 3IATA: 3 Packaging group ADR/RID: IIIIMDG: IIIIATA: III Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
| 符号 |
GHS07 |
|---|---|
| 信号词 | Warning |
| 危害声明 | H315-H319-H335 |
| 警示性声明 | P261-P305 + P351 + P338 |
| 危险品运输编码 | UN 2222 3 / PGIII |
|
~93%
50629-14-6 |
| 文献：Kendall, John T. Journal of Labelled Compounds and Radiopharmaceuticals, 2000 , vol. 43, # 9 p. 917 - 924 |
|
~94%
50629-14-6 |
| 文献：Vougioukalakis, Georgios C.; Chronakis, Nikos; Orfanopoulos, Michael Organic Letters, 2003 , vol. 5, # 24 p. 4603 - 4606 |
|
~%
50629-14-6 |
| 文献：AUSPEX PHARMACEUTICALS, INC. Patent: US2008/280886 A1, 2008 ; Location in patent: Page/Page column 28 ; US 20080280886 A1 |
|
~99%
50629-14-6 |
| 文献：Grebenik, Peter D.; Green, Malcolm L. H.; Izquierdo, Alejandro; Mtetwa, Victor S. B.; Prout, K. Journal of the Chemical Society, Dalton Transactions: Inorganic Chemistry (1972-1999), 1987 , p. 9 - 20 |
| 上游产品 5 | |
|---|---|
| 下游产品 0 | |