前往化源商城
入驻化源商城

品牌现货直购
供应商:我要出现这里


查看所有供应商和价格请点击:

41706-15-4生产厂家

41706-15-4价格

41706-15-4

41706-15-4结构式
41706-15-4结构式

化源商城直购

中文名 四(2,2,6,6-四甲基-3,5-庚烷二酸铌
英文名 (Z)-5-hydroxy-2,2,6,6-tetramethylhept-4-en-3-one,(E)-5-hydroxy-2,2,6,6-tetramethylhept-4-en-3-one,niobium
英文别名 tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)niobium(iv)
nb(tmhd)4
niobium tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionate)
MFCD00145379
沸点 325ºC
熔点 219-22ºC
分子式 C44H76NbO8
分子量 825.97600
精确质量 825.46000
PSA 105.20000
LogP 12.05000
外观性状 固体
储存条件

密封、阴凉、干燥保存

稳定性

常规情况下不会分解,没有危险反应

更多

1. 性状:粉末

2. 密度(g/mL,25ºC):未确定

3. 相对蒸汽密度(g/mL,空气=1): 未确定

4. 熔点(ºC):219-220

5. 沸点(ºC):325

6. 沸点(ºC,2mm hg):未确定

7. 折射率:未确定

8. 闪点(ºC):325

9. 比旋光度(ºC):未确定

10. 自燃点或引燃温度(ºC): 未确定

11. 蒸气压(kPa,25ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:不能溶解的


Section 1: Product Identification
Chemical Name:Tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)niobium (IV), 99% Nb(TMHD)4
CAS Registry Number:41706-15-4
Formula:Nb(C11H19O2)4
EINECS Number:none
Chemical Family:metal beta-diketonate complexes
Synonym:Dipivaloylmethane, niobium complex

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound41706-15-4100%no datano data

Section 3: Hazards Identification
Emergency Overview:No particular hazard associated with this material. May be irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:May cause slight to mild irritation of the eyes.
Skin Contact:May cause slight to mild irritation of the skin.
Inhalation:May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No specific information is available on the physiological effects of ingestion.
Acute Health Affects:May be irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical
Skin Exposure:
assistance if irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a sealed container. Keep away from heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:black xtl.
Molecular Weight:826
Melting Point:219-220°
Boiling Point:dec. 325°C
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable solid
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:Oxidizing agents
Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, and metal oxides and carbonates.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

对水是稍微有危害的不要让未稀释或大量的产品接触地下水、水道或者污水系统,若无政府许可,勿将材料排入周围环境。

危害码 (欧洲) Xn
风险声明 (欧洲) 36/37/38
安全声明 (欧洲) 26-36/37/39