中文名 | 肯普肽 乙酸盐 |
---|---|
英文名 | Kemptide acetate salt |
中文别名 | 肯普肽 |
英文别名 |
L-leucyl-N-(diaminomethylidene)-L-ornithyl-N-(diaminomethylidene)-L-ornithyl-L-alanyl-L-seryl-L-leucylglycine
kemptide Glycine, N-(N-(N-(N-(N2-(N2-L-leucyl-L-arginyl)-L-arginyl)-L-alanyl)-L-seryl)-L-leucyl)- Glycine, L-leucyl-N-(diaminomethylene)-L-ornithyl-N-(diaminomethylene)-L-ornithyl-L-alanyl-L-seryl-L-leucyl- L-Leucyl-N-(diaminomethylene)-L-ornithyl-N-(diaminomethylene)-L-ornithyl-L-alanyl-L-seryl-L-leucylglycine MFCD00076710 LRRASLG |
描述 | Kemptide是一种合成的七肽,作为cAMP依赖性蛋白激酶 (PKA) 的特异性底物。 |
---|---|
相关类别 | |
体外研究 | Kemptide是cAMP依赖性蛋白激酶(PK)底物的合成构建体。不同类型的完整细胞在存在细胞外ATP和cAMP的情况下催化Kemptide的磷酸化,Kemptide的Km值为3-4 uM [1]。 Kemptide是一种衍生自丙酮酸激酶的合成肽底物[2]。 |
激酶实验 | 使用SignaTECT cAMP-依赖性蛋白激酶(PKA)测定系统在成熟的各个阶段在10个卵母细胞的库中测量PKA活性。在不存在外源性cAMP的情况下进行基础PKA活性的测量,而在含有0.025mM cAMP的反应缓冲液中进行总(cAMP刺激的)PKA活性的测量[2]。 |
参考文献 |
密度 | 1.4±0.1 g/cm3 |
---|---|
分子式 | C32H61N13O9 |
分子量 | 771.908 |
精确质量 | 771.471497 |
PSA | 381.95000 |
LogP | -1.39 |
折射率 | 1.626 |
储存条件 | 存放在密封容器内,并放在阴凉,干燥处。储存的地方必须远离氧化剂。-20ºC保存。 |
稳定性 | 指定条件下稳定,远离氧化物,远离强酸,强碱。 |
分子结构 | 1、 摩尔折射率:190.78 2、 摩尔体积(m3/mol):538.6 3、 等张比容(90.2K):1497.2 4、 表面张力(dyne/cm):59.6 5、 极化率(10-24cm3):75.63 |
计算化学 | 1、 疏水参数计算参考值(XlogP):-5.7 2、 氢键供体数量:13 3、 氢键受体数量:16 4、 可旋转化学键数量:26 5、 拓扑分子极性表面积(TPSA):387 6、 重原子数量:54 7、 表面电荷:0 8、 复杂度:1320 9、 同位素原子数量:0 10、 确定原子立构中心数量:0 11、 不确定原子立构中心数量:6 12、 确定化学键立构中心数量:0 13、 不确定化学键立构中心数量:0 14、 共价键单元数量:1 |
更多 | 1. 性状:米色粉末。 2. 密度(g/mL,25/4℃):未确定 3. 相对蒸汽密度(g/mL,空气=1):未确定 4. 熔点(ºC):未确定 5. 沸点(ºC,常压):未确定 6. 沸点(ºC,5.2kPa):未确定 7. 折射率:未确定 8. 闪点(ºC):未确定 9. 比旋光度(º):未确定 10. 自燃点或引燃温度(ºC):未确定 11. 蒸气压(kPa,25ºC):未确定 12. 饱和蒸气压(kPa,60ºC):未确定 13. 燃烧热(KJ/mol):未确定 14. 临界温度(ºC):未确定 15. 临界压力(KPa):未确定 16. 油水(辛醇/水)分配系数的对数值:未确定 17. 爆炸上限(%,V/V):未确定 18. 爆炸下限(%,V/V):未确定 19. 溶解性:未确定 。 |
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name: Kemptide acetate salt CAS-No.: 65189-71-1 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Label elements The product does not need to be labelled in accordance with EC directives or respective national laws. Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms: Phosphate acceptor peptide Formula: C32H61N13O9 Molecular Weight: 771,91 g/mol Section4. FIRST AID MEASURES Description of first aid measures If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. In case of skin contact Wash off with soap and plenty of water. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx) Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Avoid dust formation. Avoid breathing vapors, mist or gas. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Provide appropriate exhaust ventilation at places where dust is formed. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: -20 °C Specific end uses no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls General industrial hygiene practice. Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Body Protection Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: powder Colour: beige b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and no data available boiling range g) Flash pointno data available h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Autoignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong acids, Strong bases Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. May cause respiratory tract irritation. IngestionMay be harmful if swallowed. SkinMay be harmful if absorbed through skin. May cause skin irritation. EyesMay cause eye irritation. Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects no data available Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: -IMDG: -IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA:Not dangerous goods Transport hazard class(es) ADR/RID: -IMDG: -IATA: - Packaging group ADR/RID: -IMDG: -IATA: - Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
生态学数据: 通常对水是不危害的,若无政府许可,勿将材料排入周围环境。
|
危害码 (欧洲) | Xn |
---|---|
安全声明 (欧洲) | S22-S24/25 |
WGK德国 | 3.0 |