111-52-4

• 常用中文名：N,N,N',N'-四甲基-2-丁烯-1,4-二胺
• 常用英文名：(E)-N,N,N',N'-tetramethylbut-2-ene-1,4-diamine
• CAS号：111-52-4
• 分子式：C₈H₁₈N₂
• 分子量：142.24200
• 相关类别： 有机原料 氨基化合物 无环单胺、多胺及其衍生物和盐
• 发布时间：2018-12-17 20:57:40
• 更新时间：2024-01-01 18:25:57
• 下载msds

名称

• 中文名: 反-N,N,N',N'-四甲基-2-丁烯-1,4-二胺
• 英文名: n,n,n',n'-tetramethyl-2-butene-1,4-diamine
• 中文别名: 反-N,N,N,N-四甲基-2-丁烯-1,4-二胺; N,N,N',N'-四甲基-2-丁烯-1,4-二胺
• 英文别名: (E)-N,N,N',N'-TETRAMETHYLBUT-2-ENE-1,4-DIAMINE (IUPAC); tetra-N-methyl-but-2t-enediyldiamine; Tetra-N-methyl-but-2t-endiyldiamin; N,N,N',N'-tetramethyl-1,4-diamino-2-butene; N,N,N',N'-tetramethyl-1,3-phenylenediamine; trans-N,N,N',N'-Tetramethyl-2-butene-1,4-diamine; N,N,N',N'-Tetramethyl-m-phenylenediamine; MFCD00008336; (E)-N,N,N',N'-TETRAMETHYLBUT-2-ENE-1,4-DIAMINE; 1,3-Benzenediamine,N,N,N',N'-tetramethyl; N,N,N',N'-Tetramethylbut-2t-en-1,4-diamin; EINECS 203-879-0; Tetra-N-methyl-m-phenylendiamin; tetra-N-methyl-m-phenylenediamine; N,N,N',N'-tetramethylbenzene-1,3-diamine

物化性质

• 密度: 0.82 g/mL at 25ºC(lit.)
• 沸点: 172.4ºC at 760 mmHg
• 分子式: C₈H₁₈N₂
• 分子量: 142.24200
• 闪点: 50.6ºC
• 精确质量: 142.14700
• PSA: 6.48000
• LogP: 0.66580
• 外观性状: 无色至黄色液体
• 蒸汽压: 1.33mmHg at 25°C
• 折射率: n20/D 1.4416(lit.)
• 储存条件:

  常温，密封于阴凉通风处保存

• 稳定性:

  常温常压下稳定

  避免强氧化剂，强酸

• 分子结构:

  1、摩尔折射率：46.61

  2、摩尔体积（cm³/mol）：168.7

  3、等张比容（90.2K）：389

  4、表面张力（dyne/cm）：28.2

  5、介电常数：无可用的

  6、极化率（10^-24cm³）：18.47

  7、单一同位素质量：142.146999 Da

  8、标称质量：142 Da

  9、平均质量：142.2419 Da

• 计算化学:

  1.疏水参数计算参考值（XlogP）:0.6

  2.氢键供体数量:0

  3.氢键受体数量:2

  4.可旋转化学键数量:4

  5.互变异构体数量:无

  6.拓扑分子极性表面积6.5

  7.重原子数量:10

  8.表面电荷:0

  9.复杂度:83.4

  10.同位素原子数量:0

  11.确定原子立构中心数量:0

  12.不确定原子立构中心数量:0

  13.确定化学键立构中心数量:1

  14.不确定化学键立构中心数量:0

  15.共价键单元数量:1

• 更多:

  1. 性状：液体

  2. 密度（g/mL,25℃）：0.82

  3. 相对蒸汽密度（g/mL,空气=1）：未确定

  4. 熔点（ºC）：未确定

  5. 沸点（ºC,常压）：未确定

  6. 沸点（ºC,760mmHg：172-173

  7. 折射率：n 20/D 1.4416(lit.)

  8. 闪点（ºC）：54

  9. 比旋光度（º）：未确定

  10. 自燃点或引燃温度（ºC）：未确定

  11. 蒸气压（hPa,20ºC）：未确定

  12. 饱和蒸气压（kPa,26 ºC）：未确定

  13. 燃烧热（KJ/mol）：未确定

  14. 临界温度（ºC）：未确定

  15. 临界压力（MPa）：未确定

  16. 油水（辛醇/水）分配系数的对数值：未确定

  17. 爆炸上限（%,V/V）：未确定

  18. 爆炸下限（%,V/V）：未确定

  19. 溶解性：未确定

MSDS

Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers : trans-N,N,N′,N′-Tetramethyl-2-butene-1,4-diamine Product name CAS-No.: 111-52-4 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Flammable liquids (Category 3) Skin corrosion (Category 1B) Classification according to EU Directives 67/548/EEC or 1999/45/EC Flammable. Causes burns. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal wordDanger Hazard statement(s) H226Flammable liquid and vapour. H314Causes severe skin burns and eye damage. Precautionary statement(s) P280Wear protective gloves/ protective clothing/ eye protection/ face protection. P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310Immediately call a POISON CENTER or doctor/ physician. Supplemental Hazardnone Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R10Flammable. R34Causes burns. S-phrase(s) S16Keep away from sources of ignition - No smoking. S26In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39Wear suitable protective clothing, gloves and eye/face protection. S45In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Formula: C8H18N2 Molecular Weight: 142,24 g/mol ComponentConcentration (E)-N,N,N',N'-Tetramethylbut-2-ene-1,4-diamine CAS-No.111-52-4- EC-No.203-879-0 Section4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Cough, Shortness of breath, Headache, Nausea Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx) Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information Use water spray to cool unopened containers. Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store under inert gas. Specific end uses no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: liquid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and 172 - 173 °C at 964 hPa - lit. boiling range g) Flash point54,44 °C - closed cup h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative density0,82 g/cm3 at 25 °C n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Autoignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract. IngestionMay be harmful if swallowed. Causes burns. SkinMay be harmful if absorbed through skin. Causes skin burns. EyesCauses eye burns. Signs and Symptoms of Exposure Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Cough, Shortness of breath, Headache, Nausea Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects no data available Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: 2734IMDG: 2734IATA: 2734 UN proper shipping name ADR/RID: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. ((E)-N,N,N',N'-Tetramethylbut-2-ene- 1,4-diamine) IMDG: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. ((E)-N,N,N',N'-Tetramethylbut-2-ene- 1,4-diamine) IATA:Amines, liquid, corrosive, flammable, n.o.s. ((E)-N,N,N',N'-Tetramethylbut-2-ene-1,4-diamine) Transport hazard class(es) ADR/RID: 8 (3)IMDG: 8 (3)IATA: 8 (3) Packaging group ADR/RID: IIIMDG: IIIATA: II Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available Section15. REGULATORY INFORMATION This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment no data available Section16. OTHER INFORMATION Further information Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use only. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Corporation and its Affiliates shall not be held liable for any damage resulting from handling or from contact with the above product. See and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

安全

• 符号: GHS02, GHS05
• 信号词: Danger
• 危害声明: H226-H314
• 警示性声明: P280-P305 + P351 + P338-P310
• 个人防护装备: Faceshields;full-face respirator (US);Gloves;Goggles;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
• 危害码 (欧洲): C: Corrosive;
• 风险声明 (欧洲): R10
• 安全声明 (欧洲): 16-26-36/37/39-45
• 危险品运输编码: UN 2734 8
• WGK德国: 3
• 危险类别: 8.0

合成路线

110-57-6 124-40-3 ~% 111-52-4

文献：Cromwell; Hassner Journal of the American Chemical Society, 1955 , vol. 77, p. 1568,1570 Full Text Show Details Amundsen et al. Journal of the American Chemical Society, 1951 , vol. 73, p. 2118,2119

上下游产品

上游产品  2
110-57-6 124-40-3
下游产品  0