中文名 | 亚硫酸铂溶液 |
---|---|
英文名 | platinum(4+),disulfite |
英文别名 | MFCD00058877 |
密度 | 1.305 g/cm3 |
---|---|
分子式 | H4O7PtS2 |
分子量 | 375.23600 |
精确质量 | 374.90500 |
PSA | 176.54000 |
LogP | 0.57170 |
外观性状 | liquid | pale yellow |
储存条件 | 密闭于阴凉干燥环境中 |
稳定性 | 遵照规定使用和储存则不会分解。 |
分子结构 | 1、摩尔折射率:无可用 2、 摩尔体积(cm3/mol):无可用 3、 等张比容(90.2K):无可用 4、 表面张力(dyne/cm):无可用 5、 极化率:无可用 |
计算化学 | 1.疏水参数计算参考值(XlogP):无 2.氢键供体数量:0 3.氢键受体数量:8 4.可旋转化学键数量:0 5.互变异构体数量:无 6.拓扑分子极性表面积165 7.重原子数量:9 8.表面电荷:0 9.复杂度:18.8 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:3 |
更多 | 1. 性状:无可用 2. 密度(g/mL,25/4℃): 1.305 3. 相对蒸汽密度(g/mL,空气=1):无可用 4. 熔点(ºC):无可用 5. 沸点(ºC,常压):无可用 6. 沸点(ºC,5.2kPa):无可用 7. 折射率:无可用 8. 闪点(ºC):无可用 9. 比旋光度(º):无可用 10. 自燃点或引燃温度(ºC):无可用 11. 蒸气压(kPa,25ºC):无可用 12. 饱和蒸气压(kPa,60ºC):无可用 13. 燃烧热(KJ/mol):无可用 14. 临界温度(ºC):无可用 15. 临界压力(KPa):无可用 16. 油水(辛醇/水)分配系数的对数值:无可用 17. 爆炸上限(%,V/V):无可用 18. 爆炸下限(%,V/V):无可用 19. 溶解性:无可用 |
Section 1: Product Identification Chemical Name:Platinum sulfite acid solution(15.3% Pt) CAS Registry Number:61420-92-6 Formula:H3Pt(SO3)2OH EINECS Number:none Chemical Family:Inorganic compound Synonym:Platinum acid sulfite
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound61420-92-628%0.002mg/m30.002mg/m3 water7732-18-572% Section 3: Hazards Identification This material is a moderately strong, corrosive acid. The material is corrosive to skin, eyes, mucous Emergency Overview: membranes and respiratory tract. Primary Routes of Exposure:Ingestion, inhalation, eyes and skin Eye Contact:Severe corrosive to the eyes. Exposure can lead to permanent eye damage. Skin Contact:Corrosive to skin. Can lead to chemical burn. Inhalation:Inhalation of mist can lead to severe irritation of the mucous membranes and lungs. Ingestion:Material is corrosive. May be harmful if ingested. Acute Health Affects:Corrosive to eyes, skin, mucous membranes and respiratory tract. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:dry chemical, carbon dioxide, or water. If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure Special Fire Fighting Procedures: self- contained breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes, carbon monoxide, and sulfur oxides. Decomposion Products: Unusual Fire or Explosion Hazards: Non-flammable. No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Spill and Leak Procedures:Small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up. SECTION 7: Handling and Storage Handling and Storage:Store in a cool, dry, well-ventilated area away from heat. SECTION 8: Exposure Controls and Personal Protection Eye Protection:In addition to approved safety glasses, a face shield should be worn when working with this material. Skin Protection:When handling this material rubber gloves and an apron should be worn. Ventilation:None required In the absence of adequate ventilation a respirator should be worn. The use of a respiratory requires a Respirator: Respirator Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:None required Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:pale yellow liq. Molecular Weight:375.25 Melting Point:no data Boiling Point:no data Vapor Pressure:not applicable Specific Gravity:1.30-1.31 Odor:sulfurous odor Solubility in Water:material is a water solution SECTION 10: Stability and Reactivity Stability:air and moisture stable Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:none Incompatibility:active metals and strong bases Decomposition Products:platinum oxides, water, sulfurous acid. SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:no information available Mutagenic Effects:no information available Tetratogenic Effects:no information available SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to federal, state, and local regulations. SECTION 14: Transportation Shipping Name (CFR):Corrosive liquids, N.O.S. Hazard Class (CFR):8 Additional Hazard Class (CFR):NA Packaging Group (CFR):II UN ID Number (CFR):UN# 1760 Shipping Name (IATA):Corrosive liquid, N.O.S. Hazard Class (IATA):8 Additional Hazard Class (IATA):NA Packaging Group (IATA):II UN ID Number (IATA):UN# 1760 SECTION 15: Regulatory Information TSCA:Listed on the TSCA inventory. SARA (Title 313):Title compound not listed Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |
生态学数据: 该物质对环境可能有危害,对水体应给予特别注意。
|
危害码 (欧洲) | Xi |
---|