12289-94-0

• 常用中文名：双-(2-甲基烯丙基)环辛-1,5-二烯钌
• 常用英文名：BIS(2-METHYLALLYL)-1,5-CYCLOOCTADIENERUTHENIUM (II)
• CAS号：12289-94-0
• 分子式：C₁₆H₂₆Ru
• 分子量：319.44800
• 相关类别： 有机原料 有机金属类化合物 有机钌
• 发布时间：2018-12-26 19:13:26
• 更新时间：2024-01-02 11:21:56
• 下载msds

名称

• 中文名: 双(2-甲基烯丙基)(1,5-环辛二烯)钌(II)
• 英文名: Bis(2-methylallyl)(1,5-cyclooctadiene)ruthenium(II)
• 中文别名: 二(2-甲基烯丙基)(1,5-环辛二烯)钌(II); 双-(2-甲基烯丙基)环辛-1,5-二烯钌
• 英文别名: (1Z,5Z)-cycloocta-1,5-diene,2-methanidylprop-1-ene,ruthenium(2+); Bis(2-methylallyl)-1,5-cyclooctadieneruthenium (II); MFCD00216965; (1,5-Cyclooctadiene)bis(2-methylallyl)ruthenium (Bis(2-methallyl)(1,5-cyclooctadiene)ruthenium; Ruthenium II Cyclooctadiene Bis-(2,2,6,6-Tetramethylheptanedionate); Bis-(2-methylallyl)cycloocta-1,5-diene ruthenium(II) complex

物化性质

• 沸点: 100ºC/0.05mmHg
• 熔点: 81-85ºC
• 分子式: C₁₆H₂₆Ru
• 分子量: 319.44800
• 精确质量: 320.10800
• LogP: 5.73300
• 外观性状: Powder | tan to brown
• 储存条件:

  2 -8 °C 密闭、阴凉干燥处

• 稳定性:

  避免的物料

  水/潮湿 空气

• 水溶解性: It is soluble in water.
• 分子结构:

  1、摩尔折射率：无可用的

  2、摩尔体积（cm³/mol）：无可用的

  3、等张比容（90.2K）：无可用的

  4、表面张力（dyne/cm）：无可用的

  5、介电常数：无可用的

  6、极化率（10^-24cm³）：无可用的

  7、单一同位素质量：320.107839 Da

  8、标称质量：320 Da

  9、平均质量：319.4476 Da

• 计算化学:

  1.疏水参数计算参考值（XlogP）:无

  2.氢键供体数量:0

  3.氢键受体数量:2

  4.可旋转化学键数量:0

  5.互变异构体数量:无

  6.拓扑分子极性表面积0

  7.重原子数量:17

  8.表面电荷:0

  9.复杂度:143

  10.同位素原子数量:0

  11.确定原子立构中心数量:0

  12.不确定原子立构中心数量:0

  13.确定化学键立构中心数量:2

  14.不确定化学键立构中心数量:0

  15.共价键单元数量:4

• 更多:

  1. 性状：未确定

  2. 密度（g/mL, 20 ℃ ）：未确定

  3. 相对蒸汽密度（g/mL,空气=1）：未确定

  4. 熔点（ºC）：81-85

  5. 沸点（ºC,常压）：未确定

  6. 沸点（ºC，0.05mmHg）：100

  7. 折射率：未确定

  8. 闪点（ºC）：未确定

  9. 比旋光度（º）：未确定

  10. 自燃点或引燃温度（ºC）：未确定

  11. 蒸气压（20ºC）：未确定

  12. 饱和蒸气压（kPa,60ºC）：未确定

  13. 燃烧热（KJ/mol）：未确定

  14. 临界温度（ºC）：未确定

  15. 临界压力（KPa）：未确定

  16. 油水（辛醇/水）分配系数的对数值：未确定

  17. 爆炸上限（%,V/V）：未确定

  18. 爆炸下限（%,V/V）：未确定

  19. 溶解性：未确定

MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name: Bis(2-methylallyl)(1,5-cyclooctadiene)ruthenium(II) REACH No.: A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. CAS-No.: 12289-94-0 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Substances, which in contact with water, emit flammable gases (Category 3), H261 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC F Highly flammableR15 For the full text of the R-phrases mentioned in this Section, see Section 16. Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal wordWarning Hazard statement(s) H261In contact with water releases flammable gases. Precautionary statement(s) P231 + P232Handle under inert gas. Protect from moisture. P422Store contents under inert gas. Supplemental Hazardnone Statements Other hazards - none SECTION 3: Composition/information on ingredients Substances Synonyms: Ruthenium(II) bis(2-methylallyl) 1,5-cyclooctadiene complex Formula: C16H26Ru Molecular Weight: 319,45 g/mol CAS-No.: 12289-94-0 No components need to be disclosed according to the applicable regulations. For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 SECTION 4: First aid measures Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Dry powder Carbon dioxide (CO2) Unsuitable extinguishing media Water Special hazards arising from the substance or mixture Carbon oxides, Ruthenium oxide Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. For personal protection see section 8. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Do not flush with water. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition - No smoking. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Never allow product to get in contact with water during storage. Recommended storage temperature: -20 °C Air and moisture sensitive. Handle and store under inert gas. Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection Flame retardant protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) AppearanceForm: solid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingMelting point/range: 81,7 - 82,4 °C - lit. point f) Initial boiling point and no data available boiling range g) Flash pointno data available h) Evapouration rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available SECTION 10: Stability and reactivity Reactivity no data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions Reacts violently with water. Conditions to avoid Exposure to moisture. Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitisation no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. SECTION 12: Ecological information Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other adverse effects no data available SECTION 13: Disposal considerations Waste treatment methods Product Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: 3395IMDG: 3395IATA: 3395 UN proper shipping name ADR/RID: ORGANOMETALLIC SUBSTANCE, SOLID, WATER-REACTIVE (Bis(2-methylallyl)(1,5- cyclooctadiene)ruthenium(II)) IMDG: ORGANOMETALLIC SUBSTANCE, SOLID, WATER-REACTIVE (Bis(2-methylallyl)(1,5- cyclooctadiene)ruthenium(II)) IATA:Organometallic substance, solid, water-reactive (Bis(2-methylallyl)(1,5- cyclooctadiene)ruthenium(II)) Transport hazard class(es) ADR/RID: 4.3IMDG: 4.3IATA: 4.3 Packaging group ADR/RID: IIIIMDG: IIIIATA: III Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available SECTION 15: Regulatory information This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment For this product a chemical safety assessment was not carried out SECTION 16: Other information Full text of H-Statements referred to under sections 2 and 3. H261In contact with water releases flammable gases. Full text of R-phrases referred to under sections 2 and 3 R15 Contact with water liberates extremely flammable gases. Further information Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use only. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Corporation and its Affiliates shall not be held liable for any damage resulting from handling or from contact with the above product. See and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

毒性和生态

毒理学数据: 主要的刺激性影响： 在皮肤上面：刺激皮肤和粘膜 在眼睛上面：刺激的影响 致敏作用：没有已知的敏化现象 生态学数据: 通常对水体是稍微有害的，不要将未稀释或大量产品接触地下水，水道或污水系统，未经政府许可勿将材料排入周围环境。

安全

• 符号: GHS02
• 信号词: Warning
• 危害声明: H261
• 警示性声明: P231 + P232-P422
• 个人防护装备: Eyeshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
• 危害码 (欧洲): Xn,F
• 风险声明 (欧洲): R20/21/22
• 安全声明 (欧洲): S36/37
• 危险品运输编码: UN3395
• 包装等级: III
• 危险类别: 4.3