盘锦研峰科技有限公司
辽宁省盘锦市盘锦市双台子区
产品名：氯化钛(IV) 四氢呋喃复合物
纯度：98.0%
规格：5g
联系人：王迎
联系电话：18519017630

上海创赛科技有限公司
上海市上海市嘉定区
产品名：[Perfemiker]氯化钛(IV) 四氢呋喃复合物,97%
纯度：97.0%
规格：25g/5g
联系人：夏言
联系电话：18016376636

上海阿拉丁生化科技股份有限公司
上海市上海市浦东新区
产品名：氯化钛(IV) 四氢呋喃复合物
纯度：97.0%
规格：1g/250mg/5g/1g
联系人：阿拉丁李高志
联系电话：400-620-6333

查看所有供应商和价格请点击：

31011-57-1生产厂家

31011-57-1价格

31011-57-1

31011-57-1结构式

常用中文名：氯化钛(IV) 四氢呋喃复合物
常用英文名：Tetrachloro-bis-(tetrahydrofuran)titanium(IV)
CAS号：31011-57-1
分子式：C₈H₁₆Cl₄O₂Ti
分子量：333.89000
相关类别：有机原料有机金属类化合物有机钛
发布时间：2018-06-14 22:50:07
更新时间：2024-01-03 12:04:05

化源商城直购

中文名	四氯双(四氢呋喃)合钛(IV)
英文名	oxolane,tetrachlorotitanium
中文别名	四氯双(四氢呋喃)合钛
英文别名	MFCD00077884 titanium tetrachloride tetrahydrofuran complex

沸点	68.3ºC at 760mmHg
熔点	126-128ºC(lit.)
分子式	C₈H₁₆Cl₄O₂Ti
分子量	333.89000
闪点	1 °F
精确质量	331.93800
PSA	18.46000
LogP	4.35160
储存条件	保持贮藏器密封、储存在阴凉、干燥的地方，确保工作间有良好的通风或排气装置
稳定性	如果遵照规格使用和储存则不会分解，未有已知危险反应避免氧化物
计算化学	1.疏水参数计算参考值（XlogP）:无 2.氢键供体数量:0 3.氢键受体数量:2 4.可旋转化学键数量:0 5.互变异构体数量:无 6.拓扑分子极性表面积18.5 7.重原子数量:15 8.表面电荷:0 9.复杂度:41.9 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:3
更多	1. 性状：黄色晶体 2. 密度（g/mL,20℃）：未确定 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：126-128 5. 沸点（ºC,常压）：未确定 6. 沸点（ºC, KPa）：未确定 7. 折射率：未确定 8. 闪点（ºC）：-17.2 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：未确定 11. 蒸气压（Pa,20ºC）：未确定 12. 饱和蒸气压（KPa,20ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性：未确定

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Titanium(IV) chloride tetrahydrofuran complex
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later

registration deadline.
CAS-No.: 31011-57-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable solids (Category 1), H228
Skin corrosion (Category 1B), H314
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C CorrosiveR14, R34, R37
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H228Flammable solid.
H314Causes severe skin burns and eye damage.
Precautionary statement(s)
P210Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P280Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard information (EU)
EUH014Reacts violently with water.
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Natural product
Synonyms: Tetrachlorobis(tetrahydrofuran)titanium
Formula: C8H16Cl4O2Ti
Molecular Weight: 333,89 g/mol
CAS-No.: 31011-57-1
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Titanium tetrachloride tetrahydrofuran complex
CAS-No.31011-57-1Flam. Sol. 1; Skin Corr. 1B;<= 100 %
H228, H314, EUH014
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Titanium tetrachloride tetrahydrofuran complex
CAS-No.31011-57-1C, R14 - R34 - R37<= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
Hydrogen chloride gas, Hydrogen fluoride, Titanium/titanium oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Avoid breathing
dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or
by wet-brushing and place in container for disposal according to local regulations (see section 13). Do
not flush with water. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition
- No smoking.Take measures to prevent the build up of electrostatic charge.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Never allow product to get in contact with water during storage.
Recommended storage temperature: 2 - 8 °C
Air sensitive. Reacts violently with water.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type
of protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: powder
Colour: yellow
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 126 - 128 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash point-17 °C - closed cup
h) Evapouration rateno data available
i) Flammability (solid, gas) The substance or mixture is a flammable solid with the category 1.
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight. Exposure to moisture.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
skin., Cough, Shortness of breath, Headache, Nausea

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 2925IMDG: 2925IATA: 2925
UN proper shipping name
ADR/RID: FLAMMABLE SOLID, CORROSIVE, ORGANIC, N.O.S. (Titanium tetrachloride
tetrahydrofuran complex)
IMDG: FLAMMABLE SOLID, CORROSIVE, ORGANIC, N.O.S. (Titanium tetrachloride
tetrahydrofuran complex)
IATA:Flammable solid, corrosive, organic, n.o.s. (Titanium tetrachloride tetrahydrofuran complex)
Transport hazard class(es)
ADR/RID: 4.1 (8)IMDG: 4.1 (8)IATA: 4.1 (8)
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15 - REGULATORY INFORMATION
N/A

SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

通常对水是不危害的，若无政府许可，勿将材料排入周围环境。

符号	GHS02, GHS05
信号词	Danger
危害声明	H228-H314
补充危害声明	Reacts violently with water.
警示性声明	P210-P280-P305 + P351 + P338-P310
个人防护装备	Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
危害码 (欧洲)	C: Corrosive;
风险声明 (欧洲)	R14
安全声明 (欧洲)	26-36/37/39-45
危险品运输编码	UN 2925 4.1/PG 2
WGK德国	3
包装等级	II