前往化源商城

84233-52-3

84233-52-3结构式
84233-52-3结构式

化源商城直购

中文名 3-(2-溴乙酰氨基甲基)-2,2,5,5-甲基-1-吡咯烷基氧化物
英文名 3-(2-Bromoacetamidomethyl)-PROXYL3-(2-Bromoacetamidomethyl)-2,2,5,5-tetramethyl-1-pyrrolidinoxy
中文别名 3-(2-溴乙酰胺甲基)-2,2,5,5-四甲基-1-氧化吡咯烷
密度 1.292g/cm3
沸点 406.9ºC at 760 mmHg
熔点 62-65ºC
分子式 C11H20BrN2O2
分子量 292.19300
闪点 199.9ºC
精确质量 291.07100
PSA 32.34000
LogP 2.05090
折射率 1.507
储存条件

密闭于0-6 ºC阴凉干燥环境中

稳定性

遵照规定使用和储存则不会分解。

分子结构

1、摩尔折射率:无可用

2、 摩尔体积(cm3/mol):无可用

3、 等张比容(90.2K):无可用

4、 表面张力(dyne/cm):无可用

5、 极化率:无可用

计算化学

1、 疏水参数计算参考值(XlogP):1.5

2、 氢键供体数量:2

3、 氢键受体数量:3

4、 可旋转化学键数量:3

5、 拓扑分子极性表面积(TPSA):52.6

6、 重原子数量:16

7、 表面电荷:0

8、 复杂度:279

9、 同位素原子数量:0

10、 确定原子立构中心数量:1

11、 不确定原子立构中心数量:0

12、 确定化学键立构中心数量:0

13、 不确定化学键立构中心数量:0

14、 共价键单元数量:1

更多

1. 性状:无可用

2. 密度(g/mL,25/4℃):无可用

3. 相对蒸汽密度(g/mL,空气=1):无可用

4. 熔点(ºC):61-64

5. 沸点(ºC,常压):无可用

6. 沸点(ºC,5.2kPa):无可用

7. 折射率:无可用

8. 闪点(ºC):无可用

9. 比旋光度(º):无可用

10. 自燃点或引燃温度(ºC):无可用

11. 蒸气压(kPa,25ºC):无可用

12. 饱和蒸气压(kPa,60ºC):无可用

13. 燃烧热(KJ/mol):无可用

14. 临界温度(ºC):无可用

15. 临界压力(KPa):无可用

16. 油水(辛醇/水)分配系数的对数值:无可用

17. 爆炸上限(%,V/V):无可用

18. 爆炸下限(%,V/V):无可用

19. 溶解性:无可用

Name: 3-(2-Bromoacetamido-methyl)-proxyl, free radical Material Safety Data Sheet
Synonym: 3-(2-Bromoacetamidomethyl)-2,2,5,5-tetramethyl-1-pyrolidinoxy.
CAS: 84233-52-3
Section 1 - Chemical Product MSDS Name: 3-(2-Bromoacetamido-methyl)-proxyl, free radical Material Safety Data Sheet
Synonym: 3-(2-Bromoacetamidomethyl)-2,2,5,5-tetramethyl-1-pyrolidinoxy.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
84233-52-3 3-(2-bromoacetamido-methyl)-proxyl, fr 100.0 unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Light sensitive.The toxicological properties of this material have not been fully investigated. Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.
SECTION 4 - FIRST AID MEASURES
Eyes:
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote: None reported.
SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.)
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 84233-52-3: Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 61.00 - 64.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H20BrN2O2
Molecular Weight: 292.19
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. May discolor on exposure to light. Stability unknown.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 84233-52-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-(2-bromoacetamido-methyl)-proxyl, free radical - Not listed by ACGIH, IARC, or NTP.
SECTION 12 - ECOLOGICAL INFORMATION Other No information available.
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material.
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases: S 24/25 Avoid contact with skin and eyes. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 84233-52-3: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 84233-52-3 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 84233-52-3 is not listed on the TSCA inventory. It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 12/17/1998 Revision #2 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

通常对水是不危害的,若无政府许可,勿将材料排入周围环境。

安全声明 (欧洲) S24/25