Impact of the presence of Mo carbide species prepared ex situ in Mo/HZSM-5 on the catalytic properties in methane aromatization
Mustafizur Rahman, Apoorva Sridhar, Sheima J. Khatib
Index: 10.1016/j.apcata.2018.03.023
Full Text: HTML
Abstract
The catalytic activity of HZSM-5 supported Mo-oxide (MoOx) and Mo-carbide (MoCy) for methane aromatization was studied using a packed-bed microreactor. MoOx/HZSM-5 catalysts with 3, 6, 10, and 12 wt.% Mo loading were prepared by incipient wetness impregnation method followed by calcination at 500 °C. The MoCy/HZSM-5 catalysts were prepared ex-situ by treating the oxide catalysts by temperature-programmed reduction and carburization. The MoCy/HZSM-5 catalysts show significantly higher activities and stability compared to that of the MoOx/HZSM-5 catalysts. Unlike the oxide catalysts, not only methane conversion and benzene yield improve with higher Mo loading but also the deactivation rate becomes much slower for the carbide catalysts. The optimum carbide catalyst has a Mo loading of 10 wt% The catalysts were characterized by XRD, N2 adsorption, TPR, NH3-TPD, TPO,TGA and 27-Al-NMR. The results show that the oxide catalysts at a high loading face pore blockage after few hours of reaction, which makes the active sites inaccessible to CH4. Carbide catalysts, on the hand face no pore blockage even after a long period of reaction, making them much better catalysts than the oxides for nonoxidative methane aromatization reaction.