69478-77-9

---

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Category 1C
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 1
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementCauses severe skin burns and eye damage
Precautionary statements
[Prevention]Do not breathe.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Store locked up.
[Storage]
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government

---

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):1-Benzyl-3-(dimethylamino)pyrrolidine
>96.0%(GC)
Percent:
CAS Number:69478-77-9
Chemical Formula:C13H20N2
1-Benzyl-3-(dimethylamino)pyrrolidine

---

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
induce vomiting.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

---

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, carbon dioxide.
media:
Extinguishing media not to Water (It may scatter and spread fire.)
be used:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.
Special protective
equipment for firefighters:

---

Section6. ACCIDENTAL RELEASE MEASURES
Use extra personal protective equipment (self-contained breathing apparatus). Keep
Personal precautions,
protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.

---

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Storage
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

---

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Install a closed system or local exhaust. Also install safety shower and eye bath.
Engineering controls:
Personal protective equipment
Respiratory protection:Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
air respirator, etc. Use respirators approved under appropriate government standards
and follow local and national regulations.
Hand protection:Impervious gloves.
1-Benzyl-3-(dimethylamino)pyrrolidine

---

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

---

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Form:clear
Very pale yellow - Yellow
Color:
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:117 °C/0.3kPa
Flash Point:No data available
Explosive limits
Lower:No data available
No data available
Upper:
Density:0.97
Solubility:No data available

---

Section10. STABILITY AND REACTIVITY
Stability:Stable under proper conditions.
Reactivity:No special reactivity has been reported.
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
Products:

---

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
No data available
NTP =
Reproductive toxicity:No data available

---

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobillity in soil
log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

---

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.
1-Benzyl-3-(dimethylamino)pyrrolidine

---

Section14. TRANSPORT INFORMATION
Hazards Class:8: Corrosive.
UN-No:2735
Proper shipping name:Polyamines, liquid, corrosive, n.o.s.
Packing group:III

---

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A