Top Suppliers:I want be here

20173-24-4

20173-24-4 structure
20173-24-4 structure

Name 2-pyridin-3-ylethanamine
Synonyms 2-(3-Pyridinyl)ethanamine
3-aminoethyl pyridine
3-Pyridineethanamine
MFCD00191604
3-PYRIDINEETHANEAMINE
2-(pyridin-3-yl)ethanamine
2-pyridine-3-yl-ethyl amine
3-(2-Aminoethyl)pyridine
2-(3-Pyridyl)ethylamine
Density 1.0±0.1 g/cm3
Boiling Point 228.8±15.0 °C at 760 mmHg
Molecular Formula C7H10N2
Molecular Weight 122.168
Flash Point 112.8±7.4 °C
Exact Mass 122.084396
PSA 38.91000
LogP -0.03
Vapour Pressure 0.1±0.5 mmHg at 25°C
Index of Refraction 1.541
3-(2-Aminoethyl)pyridine Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:3-(2-Aminoethyl)pyridine

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Category 1C
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 1
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementCauses severe skin burns and eye damage
Precautionary statements
[Prevention]Do not breathe.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Store locked up.
[Storage]
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):3-(2-Aminoethyl)pyridine
>98.0%(GC)(T)
Percent:
CAS Number:20173-24-4
2-(3-Pyridyl)ethylamine
Synonyms:
Chemical Formula:C7H10N2
3-(2-Aminoethyl)pyridine

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
induce vomiting.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Extinguishing media not to Solid streams of water
be used:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (self-contained breathing apparatus). Keep
protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Storage
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store under inert gas.
Protect from moisture.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
3-(2-Aminoethyl)pyridine

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
air respirator, etc. Use respirators approved under appropriate government standards
and follow local and national regulations.
Hand protection:Impervious gloves.
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Physical state (20°C):
Form:clear
Color:Colorless - Very pale yellow
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:128 °C/3.2kPa
Flash Point:No data available
Explosive limits
Lower:No data available
Upper:No data available
Density:1.04
Solubility:No data available

Section10. STABILITY AND REACTIVITY
Stable under proper conditions.
Stability:
Reactivity:No special reactivity has been reported.
Hygroscopic, Air-sensitive
Conditions to avoid:
Incompartible materials: oxidizing agents, acids
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
Products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
No data available
Crustacea:
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
log Pow:No data available
Soil adsorption (Koc):No data available
No data available
Henry's Law
constant(PaM3/mol):
3-(2-Aminoethyl)pyridine

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:8: Corrosive.
UN-No:2735
Proper shipping name:Amines, liquid, corrosive, n.o.s.
III
Packing group:

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Symbol GHS05 GHS07
GHS05, GHS07
Signal Word Danger
Hazard Statements H315-H318-H335
Precautionary Statements P261-P280-P305 + P351 + P338
Hazard Codes Xi
Risk Phrases R34
Safety Phrases S26-S36/37/39
RIDADR 2735
Packaging Group III
Hazard Class 8