Top Suppliers:I want be here



144875-48-9

144875-48-9 structure
144875-48-9 structure

Name resiquimod
Synonyms 1-[4-Amino-2-(ethoxymethyl)-1H-imidazo[4,5-c]quinolin-1-yl]-2-methyl-2-propanol
1H-imidazo[4,5-c]quinoline-1-ethanol, 4-amino-2-(ethoxymethyl)-α,α-dimethyl-
Resiquimod
1-[4-amino-2-(ethoxymethyl)imidazo[4,5-c]quinolin-1-yl]-2-methylpropan-2-ol
1-(4-Amino-2-(ethoxymethyl)-1H-imidazo[4,5-c]quinolin-1-yl)-2-methylpropan-2-ol
4-amino-2-(ethoxymethyl)-a,a-dimethyl-1h-imidazo[4,5-c]quinoline-1-ethanol
1-[4-Amino-2-(ethoxymethyl)-1H-imidazo[4,5-c]quinolin-1-yl]-2-methylpropan-2-ol
R848
Description Resiquimod is a Toll-like receptor 7 and 8 (TLR7/TLR8) agonist that induces the upregulation of cytokines such as TNF-α, IL-6 and IFN-α.
Related Catalog
In Vitro Resiquimod (R-848) induces both hapten- and allergen-specific circulating T cells, including TH2 effectors, to produce IFN-γ and even to lose the ability to produce IL-4[2]. Resiquimod (R848) enhances PBL proliferation in a dose-dependent manner, and increases the number of BrdU-positive cells in BrdU incorporation assay. Cells treated with R848 exhibits significantly increased (3.5-fold) luciferase (a reporter of NF-κB activity) activity[3].
In Vivo Resiquimod (R-848) (50 μg/bird, i.m. route) significantly up-regulates the expression of IFN-α, IFN-β, IFN-γ, IL-1β, IL-4, iNOS and MHC-II genes in SPF chicken[1].
Kinase Assay For luciferase assay, FG-9307 cells are transfected with the firefly NF-κB-specific luciferase reporter vector pNFκB-Met-Luc2. Transfection efficiency is monitored by co-transfection with the pSEAP2 control vector, which constitutively expresses the human secreted enhanced alkaline phosphatase (SEAP). Then the cells are treated with Resiquimod (R848, 1 µg/mL), CQ (10 µM), CQ plus R848 or PBS and incubated at 22°C for 24 h. The culture medium of the transfectants is then analyzed for luciferase activity and SEAP activity using Luciferase Assay Kit and the Great EscAPe™ SEAP Chemiluminescence Detection Kit, respectively. The assay is performed three times.
Cell Assay For inhibition of lysosomal acidification, cells are incubated with 10 µM CQ for 1 h before Resiquimod (R848) treatment. After treatment, 20 µL of 5 mg/mL MTT is added to the plate. The plate is incubated at 22°C for 4 h, and 200 µL dimethyl sulfoxide is added to the plate to dissolve the reduced formazan. The plate is then read at 490 nm with a microplate reader. To determine the effect of Myd88 inhibition on R848-induced cell proliferation, the Myd88 inhibitor Pepinh-MYD and the control peptide Pepinh-Control are added to PBL at the concentration of 50 µM, and the plate is incubated at 22°C for 6 h. After incubation, the cells are treated with R848 and subjected to MTT assay as above. To determine the effect of NF-κB inactivation on R848-induced cell proliferation, BAY-11-7082, an irreversible inhibitor of IκB-α phosphorylation, is added to the cells at the concentration of 1 µM, and the plate is incubated at 22°C for 1 h. After incubation, the cells are treated with R848 and subjected to MTT assay as earlier. All experiments are performed three times.
Animal Admin A total of 40 SPF chickens of two-week old are allotted to one of the following four experimental groups (n=10/group): Group A: PBS control; Group B: inactivated NDV vaccine; Group C: commercial oil adjuvanted inactivated NDV vaccine prepared from lentogenic strain and Group D: combination of inactivated NDV vaccine and R-848 (50 μg/bird). Vaccine or PBS is administered by intramuscular route in the thigh muscle. A booster dose is given 14-day post immunization (d.p.i). Two weeks post-booster, experimental SPF birds are challenged with velogenic strain of NDV (105 ELD50 per bird) intramuscularly. Clinical signs and mortality are observed daily till 14 day post-challenge (d.p.c). Cloacal swabs (n=6/group) are collected from the birds on day 0, 4, 7 and 14 post-challenge and inoculated into 10-day old embryonated chicken eggs (n=3 eggs/sample) through intra-allantoic route. Three day post-inoculation, the allantoic fluid is checked for the NDV growth by spot haemagglutination using 10% chicken RBC.
References

[1]. Sachan S, et al. Adjuvant potential of resiquimod with inactivated Newcastle disease vaccine and its mechanism of action in chicken. Vaccine. 2015 Aug 26;33(36):4526-32.

[2]. Brugnolo F, et al. The novel synthetic immune response modifier R-848 (Resiquimod) shifts human allergen-specific CD4+ TH2 lymphocytes into IFN-gamma-producing cells. J Allergy Clin Immunol. 2003 Feb;111(2):380-8.

[3]. Zhou ZX, et al. Immune effects of R848: evidences that suggest an essential role of TLR7/8-induced, Myd88- and NF-κB-dependent signaling in the antiviral immunity of Japanese flounder (Paralichthys olivaceus). Dev Comp Immunol. 2015 Mar;49(1):113-20.

Density 1.3±0.1 g/cm3
Boiling Point 553.6±50.0 °C at 760 mmHg
Melting Point 193 °C
Molecular Formula C17H22N4O2
Molecular Weight 314.382
Flash Point 288.6±30.1 °C
Exact Mass 314.174286
PSA 86.19000
LogP 2.15
Vapour Pressure 0.0±1.6 mmHg at 25°C
Index of Refraction 1.635

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Resiquimod
: SML0196
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 144875-48-9


SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Synonyms: 4-Amino-2-(ethoxymethyl)-alpha,alpha-dimethyl-1H-imidazo(4,5-
c)quinoline-1-ethanol
R-848
Formula: C17H22N4O2
Molecular Weight: 314,38 g/mol
CAS-No.: 144875-48-9
No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: -20 °C
Hygroscopic. Store with desiccant.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: powder
b) Odourno data available
c) Odour Thresholdno data available
d) pH7,2
e) Melting point/freezing166 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- log Pow: 2,109
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Biochemical:Metabolism (intermediary): Effect on inflammation or mediation of inflammation.
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: NJ5911320
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment


SECTION 16 - ADDITIONAL INFORMATION
N/A
RIDADR NONH for all modes of transport
RTECS NJ5911320
HS Code 2933990090

~%

144875-48-9 structure

144875-48-9

Literature: US6348462 B1, ; Page column 33, 34 ;

~%

144875-48-9 structure

144875-48-9

Literature: ASCEND BIOPHARMACEUTICALS PTY LTD; PIETERSZ, Geoffrey, Alan Patent: WO2013/67597 A1, 2013 ; Location in patent: Page/Page column 80 ;

~%

144875-48-9 structure

144875-48-9

Literature: US6465654 B2, ;

~%

144875-48-9 structure

144875-48-9

Literature: WO2013/67597 A1, ;

~%

144875-48-9 structure

144875-48-9

Literature: WO2013/67597 A1, ;

~%

144875-48-9 structure

144875-48-9

Literature: WO2013/67597 A1, ;

~%

144875-48-9 structure

144875-48-9

Literature: WO2013/67597 A1, ;

~%

144875-48-9 structure

144875-48-9

Literature: WO2013/67597 A1, ;
HS Code 2933990090
Summary 2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%