Top Suppliers:I want be here


20344-49-4

20344-49-4 structure
20344-49-4 structure
  • Name: Iron hydroxide oxide
  • Chemical Name: Iron hydroxide oxide
  • CAS Number: 20344-49-4
  • Molecular Formula: FeHO2
  • Molecular Weight: 88.85170
  • Create Date: 2018-07-25 18:11:37
  • Modify Date: 2026-08-15 17:57:38

Name Iron hydroxide oxide
Synonyms Iron(Ⅲ) Hydroxide
Iron(III) hydroxide, ɑ-phase
IRON(III)OXIDE, HYDRATED, MESH
tri-iron dodecacarbonyl
Iron(III)oxide,Ferric hydroxide oxide
Ferrous acid
Iron(III) hydroxide, γ-phase
Iron(III) hydroxide, gamma-phase
Gamma-phase
iron hydroxide oxide
EINECS 243-746-4
MFCD00016080
Iron(III) hydroxide, Nanopticle dispersion
asdasdas
iron(III) oxide
IRON OXIDE YELLOW HD718
Iron(III) hydroxide
Ferric oxyhydroxide
Iron (III) Hydroxide, Crystalline
Eisen(III)-hydroxidoxid
iron(iii) oxyhydroxide
Ferric oxide hydroxide
a-Iron hydroxide
Iron(III) oxide hydrated, catalyst ade, Mesh
ironhydroxideoxide(fe(oh)o)
Iron(III) hydroxide, in H
Goethite,Ferric hydroxide oxide, Iron(III)oxide
Iron OxyhydroxideNanowires A10
ferric acid
iron dodecarbonyl
313 IRON OXIDE YELLOW
iron oxide yellow
Iron Hydroxide Oxide Nanopticles / Nanopowder
Iron(III) hydroxide, ^a-phase
Iron(III) hydroxide, alpha-phase
Iron monohydroxide monooxide
dodecacarbonyltriiron
Iron OxyhydroxideNanowires A50
Hodgsons Bayferrox Yellow
dodecacarbonyl-triangulo-tri-iron
FERRIC HYDROXIDE
ferric hydroxide oxide
ferric oxide yellow
Goethite Fe
dodecacarbonyltriiron(0)
IRON (III) HYDROXIDE
IRON(III)OXYHYDROXIDEINWATERATPH=-0.5(FEO-W320)
iron:oxygen(2-):hydroxide
Hydrated iron oxide (III)
Iron(III) hydroxide, ^y-phase
Ferric hydroxide oxide
Ferric hydroxide oxide (Iron(III) oxide
Density 3.4-3.9
Melting Point 135°C
Molecular Formula FeHO2
Molecular Weight 88.85170
Exact Mass 88.93260
PSA 23.06000
Stability Stable.

Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Iron(III) oxide
CAS-No.: 20344-49-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms: Ferric hydroxide oxide
Formula: HFeO2
Molecular Weight: 88,85 g/mol

Section4. FIRST AID MEASURES
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Special hazards arising from the substance or mixture
Iron oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
The product itself does not burn.

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions
No special environmental precautions required.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Immersion protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 480 min
Material tested:Dermatril® ( Z677272, Size M)
Splash protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 30 min
Material tested:Dermatril® ( Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: crystalline
Colour: red brown
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointnot applicable
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. May cause respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
Eyes
May cause eye irritation.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A
Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
Hazard Codes Xn
RIDADR NONH for all modes of transport
WGK Germany -
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.