349-59-7

---

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDS
Flammable liquidsCategory 3
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementsFlammable liquid and vapour
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
[Prevention]Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Keep container tightly closed.
Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
measures against ignition by the static discharge and the spark.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage]Store in a well-ventilated place. Keep cool.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.
Other hazards which do notMay cause polimerization.
result in classification
TBC)

---

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:3,5-Bis(trifluoromethyl)styrene (stabilized with TBC)
Percent:>98.0%(GC)
CAS Number:349-59-7
Chemical Formula:C10H6F6

---

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

---

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Unsuitable extinguishing Solid streams of water
media:
Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
from the chemical:Container may explode when heated. Combat fire from a sheltered position.
Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
spraying with water. Eliminate all ignition sources if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

---

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
up: Adhered or collected material should be promptly disposed of, in accordance with
appropriate laws and regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards:case of a fire. Use spark-proof tools and explosion-proof equipment.

---

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Keep away from heat/sparks/open flame/hot
surfaces. -No smoking. Take measures to prevent the build up of electrostatic
charge. Use explosion-proof equipment. Wash hands and face thoroughly after
handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
TBC)

---

Section7. HANDLING AND STORAGE
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store under inert gas.
Store away from incompatible materials such as oxidizing agents.
Air-sensitive
Packaging material:Law is followed.

---

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Install a closed system or local exhaust. Also install safety shower and eye bath.
Engineering controls:
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Physical state (20°C):
Form:clear - slightly cloudy
Color:Colorless - Very pale yellow
No data available
Odor:
pH: No data available
Melting point/freezing point:8°C
Boiling point/range:No data available
50°C
Flash point:
Flammability or explosive
limits:
Lower:No data available
No data available
Upper:
Relative density:1.35
No data available
Solubility:

---

Section10. STABILITY AND REACTIVITY
Chemical stability:Polymerization may occur under the influences of heat, light or upon contact with
polymelization initiator such as peroxides etc.
Possibility of hazardous No special reactivity has been reported.
reactions:
heat, spark, open flame, static discharge, light
Conditions to avoid:
Incompatible materials: oxidizing agents, strong acids
Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen fluoride
products:

---

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
No data available
IARC =
NTP =No data available
Reproductive toxicity:No data available

---

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
TBC)

---

Section12. ECOLOGICAL INFORMATION
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
No data available
Log Pow:
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

---

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

---

Section14. TRANSPORT INFORMATION
3: Flammable liquid.
Hazards Class:
UN-No:1993
Proper shipping name:Flammable liquid, n.o.s.
Packing group:III

---

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A