Top Suppliers:I want be here

766-92-7

766-92-7 structure
766-92-7 structure

Name benzyl methyl sulfide
Synonyms methylsulfanylmethylbenzene
EINECS 212-174-7
Benzyl Methyl Sulfide
[(Methylsulfanyl)methyl]benzene
Benzene, [(methylthio)methyl]-
2-Phenylethanethiol
benzyl(methyl)sulfane
Sulfide, benzyl methyl (8CI)
Benzeneethanethiol
MFCD00008563
α-(Methylthio)toluene
Density 1.0±0.1 g/cm3
Boiling Point 198.4±9.0 °C at 760 mmHg
Melting Point -28 °C
Molecular Formula C8H10S
Molecular Weight 138.230
Flash Point 73.3±0.0 °C
Exact Mass 138.050323
PSA 25.30000
LogP 2.56
Vapour Pressure 0.5±0.4 mmHg at 25°C
Index of Refraction 1.556
Name: Benzyl Methyl Sulfide 98% Material Safety Data Sheet
Synonym: None Know
CAS: 766-92-7
Section 1 - Chemical Product MSDS Name:Benzyl Methyl Sulfide 98% Material Safety Data Sheet
Synonym:None Know

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
766-92-7 Benzyl Methyl Sulfide 98% 212-174-7
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic:
Prolonged or repeated exposure may cause nausea, dizziness, and headache. Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Combustible liquid. Containers may explode when heated. Vapors from liquefied gas are initially heavier than air and spread along ground.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 766-92-7: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Clear liquid
Color: colorless - light yellow
Odor: stench
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 20 deg
Viscosity: Not available.
Boiling Point: 195 - 198 deg C @ 7
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 73 deg C ( 163.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.0150g/cm3
Molecular Formula: C8H10S
Molecular Weight: 138.23

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 766-92-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzyl Methyl Sulfide - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 766-92-7: No information available.
Canada
CAS# 766-92-7 is listed on Canada's DSL List.
CAS# 766-92-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 766-92-7 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes Xn: Harmful;
Risk Phrases R20/22
Safety Phrases S24/25
RIDADR NONH for all modes of transport
WGK Germany 3