12266-38-5

12266-38-5 structure
12266-38-5 structure
  • Name: Lead Antimonide
  • Chemical Name: stibanylidynelead
  • CAS Number: 12266-38-5
  • Molecular Formula: PbSb
  • Molecular Weight: 328.96000
  • Create Date: 2018-05-05 08:00:00
  • Modify Date: 2025-08-27 12:49:03

Name stibanylidynelead
Synonyms Lead monoantimonide
Lead antimonide
MFCD00151190
EINECS 235-536-6
Density 6.72
Molecular Formula PbSb
Molecular Weight 328.96000
Exact Mass 328.88000

Section 1: Product Identification
Chemical Name:Lead antimonide, 99+%
CAS Registry Number:12266-38-5
Formula:PbSb
EINECS Number:235-536-6
Chemical Family:inorganic compound
Synonym:none

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound12266-38-5100%0.05mg/m3 (as Pb)0.05mg/m3 (as Pb)

Section 3: Hazards Identification
Harmful by inhalation and if swallowed. Possible risk of harm to the unborn child. Danger of cumulative effects.
Emergency Overview:
Possible risk of impaired fertility. May cause cancer,
Primary Routes of Exposure:Inhalation (of dust or fume)
Eye Contact:The dust may cause slight to mild irritation of the eyes.
Skin Contact:The dust may cause slight to mild irritation of the skin.
Inhalation:Harmful by inhalation. Large dust exposure may cause seizures, coma, and cardio respiratory arrest.
Harmful if swallowed. Ingestion of dust may lead to dizziness, abdominal cramps, vomiting, bloody diarrhea,
Ingestion:
weakness, and convulsions.
Harmful by inhalation and if swallowed. Possible risk of harm to the unborn child. Danger of cumulative effects.
Acute Health Affects:
Possible risk of impaired fertility. May cause cancer. The chronic effects include diarrhea, loss of appetite,
Chronic Health Affects:insomnia, weakness, muscle pain, headache, dizziness, anemia. The subject of chronic lead poisoning can
not be adequately addressed in this document.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide or dry powder.
Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
Special Fire Fighting Procedures:
and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic lead oxide dust.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and
Spill and Leak Procedures:
swept up.

SECTION 7: Handling and Storage
Handling and Storage:No special precautions needed in handling and storage.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.
Ventilation:Handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:gray pieces
Molecular Weight:328.94
Melting Point:no data
Boiling Point:no data
Vapor Pressure:not applicable
Specific Gravity:no data
Odor:not determined
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents
Decomposition Products:lead oxide and antimony oxide fumes

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:Carcinogen (as Pb)
Mutagenic Effects:No data available
Tetratogenic Effects:Reproductive effector (as Pb)

SECTION 12: Ecological Information
Avoid release to groundwater or waterways. Very toxic to aquatic organisms. May cause long-term adverse
Ecological Information:
effects.

SECTION 13: Disposal Considerations
Disposal:Dispose of according to federal, state, and local regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Listed in the TSCA inventory.
SARA (Title 313):See Category codes N420 and N010 for reporting.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes Xi
RIDADR UN1549
Packaging Group III
Hazard Class 6.1
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.