4-Fluoro-3-nitrobenzonitrile

Modify Date: 2024-01-02 13:14:09

4-Fluoro-3-nitrobenzonitrile Structure
4-Fluoro-3-nitrobenzonitrile structure
Common Name 4-Fluoro-3-nitrobenzonitrile
CAS Number 1009-35-4 Molecular Weight 166.11
Density 1.4±0.1 g/cm3 Boiling Point 277.6±25.0 °C at 760 mmHg
Molecular Formula C7H3FN2O2 Melting Point 90.5-91.5ºC
MSDS USA Flash Point 121.7±23.2 °C

 Use of 4-Fluoro-3-nitrobenzonitrile


4-Fluoro-3-nitrobenzonitrile is a biochemical reagent that can be used as a biological material or organic compound for life science related research.

 Names

Name 4-Fluoro-3-nitrobenzonitrile
Synonym More Synonyms

 4-Fluoro-3-nitrobenzonitrile Biological Activity

Description 4-Fluoro-3-nitrobenzonitrile is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
Related Catalog
In Vitro 4-Fluoro-3-nitrobenzonitrile,用作医药中间体。也用作合成和精细化工中间体。

 Chemical & Physical Properties

Density 1.4±0.1 g/cm3
Boiling Point 277.6±25.0 °C at 760 mmHg
Melting Point 90.5-91.5ºC
Molecular Formula C7H3FN2O2
Molecular Weight 166.11
Flash Point 121.7±23.2 °C
Exact Mass 166.017853
PSA 69.61000
LogP 0.90
Vapour Pressure 0.0±0.6 mmHg at 25°C
Index of Refraction 1.553
Storage condition 2~8℃

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
4-Fluoro-3-nitrobenzonitrile
Product Name:
Synonyms:5-Cyano-5-fluoro-1-nitrobenzene

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H314:Causes severe skin burns and eye damage
P280:Wear protective gloves/protective clothing/eye protection/face protection
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P310:Immediately call a POISON CENTER or doctor/physician

Section3. Composition/information on ingredients.
Ingredient name:4-Fluoro-3-nitrobenzonitrile
CAS number:1009-35-4

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
This product should be handled only by, or under the close supervision of, those properly qualified
Handling:
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula: C7H3FN2O2
Molecular weight: 166.1

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
UN Number:UN3261 Class: 8 Packing group: II
Proper shipping name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (4-Fluoro-3-nitrobenzonitrile)

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi: Irritant;
Risk Phrases R20/21/22
Safety Phrases 26-36/37/39
RIDADR UN 3439
HS Code 2926909090

 Customs

HS Code 2926909090
Summary HS:2926909090 other nitrile-function compounds VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0%

 Synonyms

4-Cyano-1-fluoro-2-nitrobenzene
MFCD01632197
WNR BF ECN
Benzonitrile, 4-fluoro-3-nitro-
4-Fluoro-3-nitrobenzonitrile