3,4-Diamino anisole

Modify Date: 2025-08-25 11:35:29

3,4-Diamino anisole Structure
3,4-Diamino anisole structure
Common Name 3,4-Diamino anisole
CAS Number 102-51-2 Molecular Weight 138.167
Density 1.2±0.1 g/cm3 Boiling Point 302.4±22.0 °C at 760 mmHg
Molecular Formula C7H10N2O Melting Point 46-48°C
MSDS N/A Flash Point 161.7±16.0 °C

 Names

Name 4-Methoxy-O-Phenylenediamine
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.2±0.1 g/cm3
Boiling Point 302.4±22.0 °C at 760 mmHg
Melting Point 46-48°C
Molecular Formula C7H10N2O
Molecular Weight 138.167
Flash Point 161.7±16.0 °C
Exact Mass 138.079315
PSA 61.27000
LogP -0.16
Vapour Pressure 0.0±0.6 mmHg at 25°C
Index of Refraction 1.619
Storage condition Refrigerator, under inert atmosphere

 MSDS

Name: 4-Methoxy-o-phenylenediamine Material Safety Data Sheet
Synonym:
CAS: 102-51-2
Section 1 - Chemical Product MSDS Name:4-Methoxy-o-phenylenediamine Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
102-51-2 4-Methoxy-o-phenylenediamine unlisted
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
Harmful if inhaled. Causes respiratory tract irritation.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Storage:
Store in a tightly closed container. Keep refrigerated. (Store below 4C/39F.)

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 102-51-2: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 46 - 48 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H10N2O
Molecular Weight: 138.0828

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 102-51-2: ST2690000 LD50/LC50:
Not available.
Carcinogenicity:
4-Methoxy-o-phenylenediamine - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 102-51-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 102-51-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 102-51-2 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
ST2690000
CHEMICAL NAME :
o-Phenylenediamine, 4-methoxy-
CAS REGISTRY NUMBER :
102-51-2
BEILSTEIN REFERENCE NO. :
0878789
LAST UPDATED :
199612
DATA ITEMS CITED :
1
MOLECULAR FORMULA :
C7-H10-N2-O
MOLECULAR WEIGHT :
138.19

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

MUTATION DATA

TYPE OF TEST :
DNA damage
TEST SYSTEM :
Human Fibroblast
DOSE/DURATION :
50 umol/L
REFERENCE :
MUREAV Mutation Research. (Elsevier Science Pub. B.V., POB 211, 1000 AE Amsterdam, Netherlands) V.1- 1964- Volume(issue)/page/year: 127,107,1984

 Safety Information

Hazard Codes Xi: Irritant;
Risk Phrases R23/24/25
Safety Phrases S26-S36/37/39-S45
RIDADR 2811
HS Code 2922299090

 Synthetic Route

 Customs

HS Code 2922299090
Summary 2922299090. other amino-naphthols and other amino-phenols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

MFCD00047837
3,4-Diamino anisole
4-methoxy-1,2-diamino-benzene
4-Methoxy-1,2-benzenediamine
4-methoxybenzene-1,2-diamine
1,2-Benzenediamine, 4-methoxy-
4-Methoxy-1,2-diaminobenzene
3,4-Diaminoanisole
Esomeprazole Impurity 25
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.
Top Suppliers:I want be here




Get all suppliers and price by the below link:

3,4-Diamino anisole suppliers

3,4-Diamino anisole price