ethenyl acetate

Modify Date: 2024-01-11 23:51:33

ethenyl acetate Structure
ethenyl acetate structure
Common Name ethenyl acetate
CAS Number 106139-40-6 Molecular Weight 88.07450
Density 0.956 g/mL at 25ºC Boiling Point 72-73ºC(lit.)
Molecular Formula C4H6O2 Melting Point -93ºC(lit.)
MSDS Chinese USA Flash Point 20 °F
Symbol GHS02 GHS07
GHS02, GHS07
Signal Word Danger

 Names

Name ethenyl acetate
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.956 g/mL at 25ºC
Boiling Point 72-73ºC(lit.)
Melting Point -93ºC(lit.)
Molecular Formula C4H6O2
Molecular Weight 88.07450
Flash Point 20 °F
Exact Mass 88.04350
PSA 26.30000
LogP 0.69300
Index of Refraction n20/D 1.395(lit.)

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Vinyl-13C2 acetate
CAS-No.: 106139-40-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Flammable liquids (Category 2)
Skin irritation (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Highly flammable.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordDanger
Hazard statement(s)
H225Highly flammable liquid and vapour.
H315Causes skin irritation.
Precautionary statement(s)
P210Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R11Highly flammable.
S-phrase(s)
S16Keep away from sources of ignition - No smoking.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula: 13C2C2H6O2
Molecular Weight: 88,07 g/mol

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated., prolonged or repeated exposure can cause:, narcosis
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13).
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Store under inert gas. hygroscopic
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, Flame retardant antistatic protective clothing, The type of protective
equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: -93 °C - lit.
point
f) Initial boiling point and 72 - 73 °C - lit.
boiling range
g) Flash point-8,00 °C - closed cup
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerUpper explosion limit: 13,40 %(V)
flammability orLower explosion limit: 2,60 %(V)
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density0,956 g/mL at 25 °C0,956 g/cm3 at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
Incompatible materials
acids, Bases, Oxidizing agents, Peroxides
Hazardous decomposition products
no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 2.900 mg/kg
Inhalation: no data available
LD50 Dermal - rabbit - 2.335 mg/kg
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
Eyes - Human -
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
This product is or contains a component that has been reported to be possibly carcinogenic based on its
IARC, ACGIH, NTP, or EPA classification.
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. Causes respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. Causes skin irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated., prolonged or repeated exposure can cause:, narcosis
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
Toxicity to fishLC50 - Pimephales promelas (fathead minnow) - 14 mg/l - 96,0 h
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Harmful to aquatic life.
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: 1301IMDG: 1301IATA: 1301
UN proper shipping name
ADR/RID: VINYL ACETATE, STABILIZED
IMDG: VINYL ACETATE, STABILIZED
IATA:Vinyl acetate, stabilized
Transport hazard class(es)
ADR/RID: 3IMDG: 3IATA: 3
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

Section16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

 Safety Information

Symbol GHS02 GHS07
GHS02, GHS07
Signal Word Danger
Hazard Statements H225-H315
Precautionary Statements P210
Hazard Codes F: Flammable;T: Toxic;
Risk Phrases 11-23-36/37-40
Safety Phrases 16-23-36/37/39-45
RIDADR UN 1301 3/PG 2

 Synthetic Route

~80%

ethenyl acetate Structure

ethenyl acetate

CAS#:106139-40-6

Literature: Jarret,R.M.; Veniero,J.C.; Byrne,T.P. Journal of the American Chemical Society, 1988 , vol. 110, p. 8287

~79%

ethenyl acetate Structure

ethenyl acetate

CAS#:106139-40-6

Literature: Jarret,R.M.; Saunders,M. Journal of the American Chemical Society, 1987 , vol. 109, p. 647

 Synonyms

<1,2-(13)C2>vinyl acetate
<1,2-13C>-vinyl acetate
Vinyl-13C2 acetate
vinyl-1,2-13C2 acetate