tungsten boride

Modify Date: 2024-01-06 14:45:11

tungsten boride Structure
tungsten boride structure
Common Name tungsten boride
CAS Number 12007-10-2 Molecular Weight 378.491
Density 16.000 Boiling Point N/A
Molecular Formula BW2 Melting Point 2670°C
MSDS N/A Flash Point N/A

 Names

Name tungstenio(tungstenylidene)borane
Synonym More Synonyms

 Chemical & Physical Properties

Density 16.000
Melting Point 2670°C
Molecular Formula BW2
Molecular Weight 378.491
Exact Mass 378.911102
Appearance of Characters -325 Mesh Powder

 MSDS


Section 1: Product Identification
Chemical Name:Tungsten boride (99.5%-W) (W2B)
CAS Registry Number:12007-10-2
Formula:W2B
EINECS Number:none
Chemical Family:metal borides and carbides
Synonym:Ditungsten boride

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound12007-10-2100%5mg/m3 (as W - insoluble)no data

Section 3: Hazards Identification
Emergency Overview:Inhalation hazard as a fine dust or fume.
Primary Routes of Exposure:Ingestion, inhalation.
Eye Contact:May cause slight to mild irritation of the eyes.
Skin Contact:May cause slight to mild irritation of the skin.
Inhalation:Dust may be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No information on the physiological effects of ingestion.
Acute Health Affects:Dust may be irritating to the nose, mucous membranes and respiratory tract.
Chronic Health Affects:No information available on the effects of long-term exposure.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
Inhalation:
breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:dry chemical, carbon dioxide, or foam.
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit irritating dusts.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazard.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Sweep up the material and dispose of properly.

SECTION 7: Handling and Storage
Handling and Storage:Store the material in a sealed container.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:-325 mesh blk pwdr (10 micron or less avg. particle size)
Molecular Weight:194.66
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:No hazardous polymerization.
Conditions to Avoid:none
Incompatibility:none
Decomposition Products:none

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Safety Phrases 22-24/25

 Synonyms

tungstenio(tungstenylidene)borane
DITUNGSTEN MONOBORIDE,W
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.
Top Suppliers:I want be here


Get all suppliers and price by the below link:

tungsten boride suppliers

tungsten boride price