3-di(propan-2-yl)phosphanylpropyl-di(propan-2-yl)phosphane,palladium

Modify Date: 2024-02-01 11:48:24

3-di(propan-2-yl)phosphanylpropyl-di(propan-2-yl)phosphane,palladium Structure
3-di(propan-2-yl)phosphanylpropyl-di(propan-2-yl)phosphane,palladium structure
Common Name 3-di(propan-2-yl)phosphanylpropyl-di(propan-2-yl)phosphane,palladium
CAS Number 123333-45-9 Molecular Weight 659.17600
Density N/A Boiling Point 332ºC at 760 mmHg
Molecular Formula C30H68P4Pd Melting Point N/A
MSDS N/A Flash Point 161.9ºC

 Names

Name 3-di(propan-2-yl)phosphanylpropyl-di(propan-2-yl)phosphane,palladium

 Chemical & Physical Properties

Boiling Point 332ºC at 760 mmHg
Molecular Formula C30H68P4Pd
Molecular Weight 659.17600
Flash Point 161.9ºC
Exact Mass 658.33100
PSA 54.36000
LogP 11.94780
Vapour Pressure 0.000289mmHg at 25°C

 MSDS


Section 1: Product Identification
Chemical Name:[P,P'-1,3-bis(di-i-propylphosphino)propane][P-1,3-bis(di-i-propylphosphino)propane]palladium(0), 98%
CAS Registry Number:123333-45-9
Formula:C30H36P4Pd
EINECS Number:none
Chemical Family:metal phosphine complex
Synonym:[P-1,3-bis(di-i-propylphosphano)propane][P,P'-1,3-bis(di-i-propylphosphano)propane]palladium (0)

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound123333-45-9100%no datano data

Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract. May be harmful if swallowed.
Primary Routes of Exposure:Inhalation, skin, eyes
Eye Contact:Causes mild to moderate irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No specific information is available on the physiological effects of ingestion. May be harmful if swallowed.
Acute Health Affects:Irritating to skin, eyes and respiratory tract. May be harmful if swallowed.
Chronic Health Affects:No information on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide, dry powder or foam
Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
Special Fire Fighting Procedures:
and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards

SECTION 6: Accidental Release Measures
Small spills can be mixed with vermiculite or sodium carbonate or other non flammable adsorbent and swept
Spill and Leak Procedures:
up.

SECTION 7: Handling and Storage
Store the material in a cold, dry place in a tightly sealed container. Handle and store under an inert
Handling and Storage:
atmosphere of nitrogen or argon.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:yellow oil to solid
Molecular Weight:659.18
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air sensitive (store cold)
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:strong oxidizing agents and halogens
Decomposition Products:carbon monoxide, carbon dioxide, phosphorous pentoxide, organic fumes, palladium oxide

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to federal, state, and local regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases R36/37/38
Safety Phrases S26