Plumbane,dichlorodiethyl- structure
|
Common Name | Plumbane,dichlorodiethyl- | ||
---|---|---|---|---|
CAS Number | 13231-90-8 | Molecular Weight | 405.11800 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | C4H8Cl4Pb | Melting Point | N/A | |
MSDS | N/A | Flash Point | N/A |
Name | lead diethyl dichloride |
---|---|
Synonym | More Synonyms |
Molecular Formula | C4H8Cl4Pb |
---|---|
Molecular Weight | 405.11800 |
Exact Mass | 403.91500 |
LogP | 3.23920 |
Vapour Pressure | 0.649mmHg at 25°C |
Version 1.2
Regulation (EC) No 1907/2006 1 - Product and Company Information Product NameDICHLORODIETHYLLEAD - 50 MG 2 - Hazards Identification SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT Toxic if swallowed.
3 - Composition/Information on Ingredients Product NameCAS #EC noAnnex I Index Number DICHLORODIETHYLLEAD13231-90-8 NoneNone FormulaC4H10CL2PB Molecular Weight 336,2300 AMU 4 - First Aid Measures AFTER INHALATION If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. AFTER SKIN CONTACT In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. AFTER EYE CONTACT In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. AFTER INGESTION If swallowed, wash out mouth with water provided person is conscious. Call a physician immediately. 5 - Fire Fighting Measures ALDRICHwww.molbase.com EXTINGUISHING MEDIA Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. SPECIAL RISKS Specific Hazard(s): Emits toxic fumes under fire conditions. SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. 6 - Accidental Release Measures PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL Evacuate area. PROCEDURE(S) OF PERSONAL PRECAUTION(S) Wear self-contained breathing apparatus, rubber boots, and heavy rubber gloves. METHODS FOR CLEANING UP Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. 7 - Handling and Storage HANDLING Directions for Safe Handling: Do not breathe dust. Do not get in eyes, on skin, on clothing. Avoid prolonged or repeated exposure. STORAGE Conditions of Storage: Keep tightly closed. 8 - Exposure Controls / Personal Protection ENGINEERING CONTROLS Use only in a chemical fume hood. Safety shower and eye bath. GENERAL HYGIENE MEASURES Wash contaminated clothing before reuse. Wash thoroughly after handling. PERSONAL PROTECTIVE EQUIPMENT Respiratory Protection: Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Hand Protection: Compatible chemical-resistant gloves. Eye Protection: Chemical safety goggles. 9 - Physical and Chemical Properties AppearancePhysical State: Solid PropertyValueAt Temperature or Pressure ALDRICHwww.molbase.com pH N/A BP/BP RangeN/A MP/MP RangeN/A Flash PointN/A FlammabilityN/A Autoignition TempN/A Oxidizing Properties N/A Explosive Properties N/A Explosion LimitsN/A Vapor PressureN/A Partition Coefficient N/A ViscosityN/A Vapor DensityN/A Saturated Vapor Conc. N/A Evaporation RateN/A Bulk DensityN/A Decomposition Temp.N/A Solvent ContentN/A Water ContentN/A Surface TensionN/A ConductivityN/A Miscellaneous DataN/A SolubilityN/A 10 - Stability and Reactivity STABILITY Stable: Stable. Materials to Avoid: Strong oxidizing agents. HAZARDOUS DECOMPOSITION PRODUCTS Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide, Lead/lead oxides, Hydrogen chloride gas. HAZARDOUS POLYMERIZATION Hazardous Polymerization: Will not occur 11 - Toxicological Information ACUTE TOXICITY LD50 Oral Rat 146,000000 mg/kg LD50 Oral Mouse 420,000000 mg/kg ROUTE OF EXPOSURE Skin Contact: May cause skin irritation. Skin Absorption: May be harmful if absorbed through the skin. Eye Contact: May cause eye irritation. Inhalation: Material may be irritating to mucous membranes and upper respiratory tract. May be harmful if inhaled. Ingestion: Toxic if swallowed. 12 - Ecological Information ALDRICHwww.molbase.com No data available. 13 - Disposal Considerations SUBSTANCE DISPOSAL Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state, and local environmental regulations. 14 - Transport Information RID/ADR UN#: 3467 Class: 6.1 PG: III Proper Shipping Name: Organometallic compound, toxic, solid, n.o.s. IMDG UN#: 3467 Class: 6.1 PG: III Proper Shipping Name: Organometallic compound, toxic, solid, n.o.s. Marine Pollutant: No Severe Marine Pollutant: No Technical Name: Required IATA UN#: 3467 Class: 6.1 PG: III Proper Shipping Name: Organometallic compound, toxic, solid, n.o.s. Inhalation Packing Group I: No Technical Name: Required 15 - Regulatory Information CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES INDICATION OF DANGER: T Toxic. R-PHRASES: 25 Toxic if swallowed. S-PHRASES: 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Caution: Substance not yet fully tested (EU). 16 - Other Information WARRANTY The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to ALDRICHwww.molbase.com appropriate safety precautions. It does not represent any guarantee of the properties of the product. Inc., shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. Copyright 2010 Co. License granted to make unlimitedpaper copies for internal use only. DISCLAIMER For R&D use only. Not for drug, household or other uses. ALDRICHwww.molbase.com SECTION 16 - ADDITIONAL INFORMATION N/A |
CHEMICAL IDENTIFICATION
HEALTH HAZARD DATAACUTE TOXICITY DATA
|
HS Code | 2931900090 |
---|
Precursor 5 | |
---|---|
DownStream 5 | |
HS Code | 2931900090 |
---|---|
Summary | 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0% |
DIETHYLLEADCHLORIDE |
Diaethyl-dichlor-plumban |
Diaethylbleidichlorid |
Diaethyl-blei(2+),Dichlorid |
Diaethyl-blei-(IV)-chlorid |
Diethyldichloroplumbane |
diethyllead dichloride |
Diaethyl-blei(2+),Chlorid |
Lead,dichlorodiethyl |
diethyl lead (2+),dichloride |
Diethyldichlorolead(IV) |
plumbanedichlorodiethyl |
diethylplumbiumdichloride |
dichlorodiethylplumbane |