nickel(ii) fluoride tetrahydrate structure
|
Common Name | nickel(ii) fluoride tetrahydrate | ||
---|---|---|---|---|
CAS Number | 13940-83-5 | Molecular Weight | 168.75100 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | F2H8NiO4 | Melting Point | 233 °C (dec.)(lit.) | |
MSDS | N/A | Flash Point | N/A |
Name | nickel(ii) fluoride tetrahydrate |
---|---|
Synonym | More Synonyms |
Melting Point | 233 °C (dec.)(lit.) |
---|---|
Molecular Formula | F2H8NiO4 |
Molecular Weight | 168.75100 |
Exact Mass | 167.97400 |
PSA | 36.92000 |
LogP | 0.58320 |
Section 1: Product Identification Chemical Name:Nickel (II) fluoride tetrahydrate, 98+% CAS Registry Number:13940-83-5 Formula:NiF2.4H2O EINECS Number:233-071-3 Chemical Family:metal halide Synonym:Nickel difluoride hydrate, Nickelous fluoride hydrate
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound13940-83-560%0.1mg/m3 (as Ni)1mg/m3 (as Ni) Section 3: Hazards Identification Irritating to skin, eyes and respiratory tract. May cause sensitization by inhalation and skin contact. May cause Emergency Overview: fluoride poisoning. May cause cancer. Primary Routes of Exposure:Ingestion, inhalation, skin, eyes. Eye Contact:Causes irritation and serious eye damage. Effects may not immediately appear. Causes irritation, with delayed redness and pain. Soluble fluoride may be corrosive. Nickel salts may lead to Skin Contact: dermatitis. Inhalation:May cause sensitization by inhalation. Inhalation causes severe irritation to the respiratory tract. Ingestion:May cause salivation, nausea, vomiting, diarrhea, and abdominal pain. Fluoride poisoning may cause nausea, vomiting, diarrhea, weakness, coma, and cardiovascular collapse. Acute Health Affects: Nickel salts may cause convulsions, asphyxia, and sensitization dermatitis. Prolonged exposure to hydrolysable fluorine compounds can cause deterioration of bone and tooth structure. Chronic Health Affects:Prolonged exposure to nickel and nickel compounds may lead to skin irritation and dermatitis. May cause cancer. NTP:Yes IARC:Yes OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Apply calcium gluconate jelly Skin Exposure: or water soluble calcium salts as antidote. Seek medical assistance. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:None. Material is non-flammable. Special Fire Fighting Procedures:No special fire fighting procedures required. Hazardous Combustion andIf involved in a fire this material may emit corrosive fumes of hydrofluoric acid. Decomposion Products: Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Spill and Leak Procedures:Small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up. SECTION 7: Handling and Storage Handling and Storage:Store solid in a tightly sealed container. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators Respirator: requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:green pwdr. Molecular Weight:96.71 (168.77) Melting Point:no data Boiling Point:no data Vapor Pressure:no data Specific Gravity:no data Odor:none Solubility in Water: SECTION 10: Stability and Reactivity Stability:air and moisture stable Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:none Incompatibility:none Decomposition Products:Metal fluorides and water SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:Carcinogen (as Ni) Mutagenic Effects:no data Tetratogenic Effects:no data SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:Not listed in the TSCA inventory. SARA (Title 313):Title compound: See Category Code N495 for reporting. Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | T: Toxic; |
---|---|
Risk Phrases | R20/21/22 |
Safety Phrases | S22-S26-S36/37/39-S45 |
RIDADR | 3288 |
Packaging Group | III |
Hazard Class | 6.1 |
Nickel(II) fluoride tetrahydrate |
EINECS 233-071-3 |
MFCD00150264 |