4-IODOPHENYL ISOCYANATE structure
|
Common Name | 4-IODOPHENYL ISOCYANATE | ||
---|---|---|---|---|
CAS Number | 15845-62-2 | Molecular Weight | 245.01700 | |
Density | 1.79g/cm3 | Boiling Point | 84ºC 5mm | |
Molecular Formula | C7H4INO | Melting Point | 44-48ºC | |
MSDS | Chinese USA | Flash Point | 103.8ºC | |
Symbol |
GHS07 |
Signal Word | Warning |
Name | 1-iodo-4-isocyanatobenzene |
---|---|
Synonym | More Synonyms |
Density | 1.79g/cm3 |
---|---|
Boiling Point | 84ºC 5mm |
Melting Point | 44-48ºC |
Molecular Formula | C7H4INO |
Molecular Weight | 245.01700 |
Flash Point | 103.8ºC |
Exact Mass | 244.93400 |
PSA | 29.43000 |
LogP | 2.25850 |
Vapour Pressure | 0.0248mmHg at 25°C |
Index of Refraction | 1.636 |
Storage condition | 2-8°C |
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name: 4-Iodophenyl isocyanate CAS-No.: 15845-62-2 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Acute toxicity, Inhalation (Category 4) Acute toxicity, Dermal (Category 4) Acute toxicity, Oral (Category 4) Skin irritation (Category 2) Eye irritation (Category 2) Specific target organ toxicity - single exposure (Category 3) Classification according to EU Directives 67/548/EEC or 1999/45/EC Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and skin. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal wordWarning Hazard statement(s) H302Harmful if swallowed. H312Harmful in contact with skin. H315Causes skin irritation. H319Causes serious eye irritation. H332Harmful if inhaled. H335May cause respiratory irritation. Precautionary statement(s) P261Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P280Wear protective gloves/ protective clothing. P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazardnone Statements Safety data sheet available on request. According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R20/21/22Harmful by inhalation, in contact with skin and if swallowed. R36/37/38Irritating to eyes, respiratory system and skin. S-phrase(s) S22Do not breathe dust. S26In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36Wear suitable protective clothing. Other hazards Lachrymator. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Formula: C7H4INO Molecular Weight: 245,02 g/mol ComponentConcentration 4-Iodophenyl isocyanate CAS-No.15845-62-2- Section4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, Repeated exposure may cause asthma., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx), Hydrogen iodide Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: 2 - 8 °C Specific end use(s) no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: solid Colour: tan b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingMelting point/range: 44 - 48 °C - lit. point f) Initial boiling point and no data available boiling range g) Flash point113 °C - closed cup h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid Avoid moisture. Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals. Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure Inhalation - May cause respiratory irritation. Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects Inhalation Harmful if inhaled. Causes respiratory tract irritation. IngestionHarmful if swallowed. SkinHarmful if absorbed through skin. Causes skin irritation. EyesCauses serious eye irritation. Signs and Symptoms of Exposure burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, Repeated exposure may cause asthma., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects no data available Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: -IMDG: -IATA: 3335 UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA:Aviation regulated solid, n.o.s. (4-Iodophenyl isocyanate) Transport hazard class(es) ADR/RID: -IMDG: -IATA: 9 Packaging group ADR/RID: -IMDG: -IATA: - Environmental hazards ADR/RID: noIMDG Marine Pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
Symbol |
GHS07 |
---|---|
Signal Word | Warning |
Hazard Statements | H302-H312-H315-H319-H332-H335 |
Precautionary Statements | P261-P280-P305 + P351 + P338 |
Personal Protective Equipment | dust mask type N95 (US);Eyeshields;Gloves |
Hazard Codes | Xn: Harmful; |
Risk Phrases | R20/22;R36/37/38;R42 |
Safety Phrases | S22-S26-S36/37/39-S45 |
RIDADR | UN 2811 |
Packaging Group | II |
Hazard Class | 6.1 |
HS Code | 2929109000 |
HS Code | 2929109000 |
---|---|
Summary | 2929109000. other isocyanates. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0% |
Potential tumor or organ imaging agents--31. Radioiodinated sterol benzoates and carbamates.
Int. J. Rad. Appl. Instrum. B 16(6) , 603-7, (1989) A series of radioiodinated benzoate and carbamate esters of cholesterol and pregnenolone wherein the acyl moiety served as the carrier for radioiodine was synthesized and evaluated as potential imagin... |
|
Synthesis and Photophysical Studies of Calixarene-Based Alkynylplatinum(II) Terpyridine Complexes with Various Receptor Sites for Colorimetric and Luminescence Sensing of Anions.
Chemistry 22 , 3738-49, (2016) A series of mononuclear and dinuclear platinum(II) terpyridine complexes with amide-, sulfonamide-, and urea-containing ligands (1-9) has been successfully designed and synthesized, and their photophy... |
|
Rhodium-catalyzed asymmetric synthesis of silicon-stereogenic silicon-bridged arylpyridinones. Shintani R, et al.
Chem. Sci. 7 , 1205-1211, (2016)
|
para-iodophenyl isocyanate |
p-iodophenylisocyanate |
MFCD00013875 |
4-iodophenylisocyanate |