rubidium fluoride hydrate

Modify Date: 2024-07-18 19:25:59

rubidium fluoride hydrate Structure
rubidium fluoride hydrate structure
Common Name rubidium fluoride hydrate
CAS Number 16422-67-6 Molecular Weight 122.48100
Density 3.557 g/cm3 Boiling Point N/A
Molecular Formula FH2ORb Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name rubidium(1+),fluoride,hydrate
Synonym More Synonyms

 Chemical & Physical Properties

Density 3.557 g/cm3
Molecular Formula FH2ORb
Molecular Weight 122.48100
Exact Mass 121.92100
PSA 9.23000

 MSDS

Name: Rubidium Fluoride Hydrate 99+% Material Safety Data Sheet
Synonym: None Known
CAS: 16422-67-6
Section 1 - Chemical Product MSDS Name:Rubidium Fluoride Hydrate 99+% Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
16422-67-6 Rubidium Fluoride Hydrate 99+% unlisted
Hazard Symbols: XN
Risk Phrases: 20/21/22

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Containers may explode when heated. Non-combustible, substance itself does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water inside containers. Do NOT use straight streams of water. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use water spray, fog or regular foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 16422-67-6: United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides).2.5 mg/m3 TWA (as F) (listed under Fluorides).
France - VME: (listed as fluorides): 2.5 mg/m3 VME (as F) Germany: (listed as fluorides): 2.5 mg/m3 VME (as F) Malaysia: (listed as fluorides): 2.5 mg/m3 TWA (as F) Netherlands: (listed as fluorides): 3.5 mg/m3 STEL (as F) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1410 deg C @ 760.00mmHg
Freezing/Melting Point: 775 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 3.5570g/cm3
Molecular Formula: FRb.xH2O
Molecular Weight: 104.47

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong acids.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 16422-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Rubidium Fluoride Hydrate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 16422-67-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 16422-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 16422-67-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases R20/21/22
Safety Phrases S22
RIDADR UN 3288
Packaging Group III
Hazard Class 6.1

 Synonyms

RUBIDIUM FLUORIDE HYDRATE
Rubidium fluoride,hydrate (8CI)
Rubidium fluoride hydrate,pure
MFCD00149834
EINECS 236-603-2