(9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE

Modify Date: 2024-01-05 17:03:21

(9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE Structure
(9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE structure
Common Name (9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE
CAS Number 166410-32-8 Molecular Weight 318.798
Density 1.201±0.06 g/cm3 Boiling Point 487.1±28.0 °C at 760 mmHg
Molecular Formula C17H19ClN2O2 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name mono-fmoc ethylene diamine hydrochloride
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.201±0.06 g/cm3
Boiling Point 487.1±28.0 °C at 760 mmHg
Molecular Formula C17H19ClN2O2
Molecular Weight 318.798
Exact Mass 318.113495
PSA 64.35000
LogP 4.37700

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: Mono-fmoc ethylene diamine, HCl
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H410:Very toxic to aquatic life with long lasting effects
P273:Avoid release to the environment

Section3. Composition/information on ingredients.
Ingredient name:Mono-fmoc ethylene diamine, HCl
CAS number:166410-32-8

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula: C17H18N2O2.ClH
Molecular weight: 318.8

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
HS Code 2922499990

 Customs

HS Code 2922499990
Summary HS:2922499990 other amino-acids, other than those containing more than one kind of oxygen function, and their esters; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward) MFN tariff:6.5% General tariff:30.0%

 Synonyms

9H-Fluoren-9-ylmethyl (2-aminoethyl)carbamate hydrochloride (1:1)
FMOC-1,2-DIAMINOETHANE HCL
FMOC-DIAMINOETHANE HCL
N-Fmoc-ethylenediamine hydrochloride
Mono-fMoc ethylene diaMine,HCl
9H-9-fluorenylmethyl N-(2-aminoethyl)carbamate hydrochloride
C17H18N2O2.HCl
Carbamic acid, N-(2-aminoethyl)-, 9H-fluoren-9-ylmethyl ester, hydrochloride (1:1)
N-1-FMOC-1,2-DIAMINOETHANE HCL
FMOC-1,2-ETHYLENEDIAMINE HCL
FMOC-NH(CH2)2NH2 HCL
Fmoc-1,2-diaminoethane,hydrochloride
FMOC-EDA HCL
FMOC-1,2-ETHYLENEDIAMINE HYDROCHLORIDE
Top Suppliers:I want be here

Get all suppliers and price by the below link:

(9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE suppliers

(9H-FLUOREN-9-YL)METHYL 2,3-DIAMINOPROPANOATE HYDROCHLORIDE price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3