1-Ethyl-2-iodo-3-methylbenzene

Modify Date: 2026-07-02 00:39:06

1-Ethyl-2-iodo-3-methylbenzene Structure
1-Ethyl-2-iodo-3-methylbenzene structure
Common Name 1-Ethyl-2-iodo-3-methylbenzene
CAS Number 175277-95-9 Molecular Weight 246.08800
Density 1.532g/cm3 Boiling Point 118-120ºC(15 torr)
Molecular Formula C9H11I Melting Point N/A
MSDS N/A Flash Point 107.1ºC

 Names

This table lists Chinese names, IUPAC names and various aliases of this chemical substance.

Name 2-Ethyl-6-methyliodobenzene
Synonym More Synonyms

 Chemical & Physical Properties

This table shows physicochemical parameters including melting point, boiling point, density, solubility and optical rotation. Missing data is marked as N/A.

Density 1.532g/cm3
Boiling Point 118-120ºC(15 torr)
Molecular Formula C9H11I
Molecular Weight 246.08800
Flash Point 107.1ºC
Exact Mass 245.99100
LogP 3.16200
Vapour Pressure 0.0462mmHg at 25°C
Index of Refraction 1.59-1.592
InChIKey PCSPENCTMKMGFE-UHFFFAOYSA-N
SMILES CCc1cccc(C)c1I

 MSDS

This table provides MSDS information including hazard classification, first‑aid, fire‑fighting, spill handling, operation and storage instructions.

Name: 2-Ethyl-6-methyliodobenzene Material Safety Data Sheet
Synonym: None Known
CAS: 175277-95-9
Section 1 - Chemical Product MSDS Name:2-Ethyl-6-methyliodobenzene Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
175277-95-9 2-Ethyl-6-methyliodobenzene 98% unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Store protected from light.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store protected from light.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 175277-95-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear yellow - red-brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 118 - 120 deg C @15 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H11I
Molecular Weight: 245.9815

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Light sensitive.
Conditions to Avoid:
Light, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, magnesium.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen iodide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 175277-95-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Ethyl-6-methyliodobenzene - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 175277-95-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 175277-95-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 175277-95-9 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

This table covers safety warnings, protective measures, incompatible substances and disposal guidelines for this compound.

Hazard Codes Xi: Irritant;
Safety Phrases S24/25
HS Code 2903999090

 Precursor & DownStream

This table lists upstream starting materials and downstream derivative products related to this chemical.

Precursor  1

DownStream  0

 Customs

This table shows customs‑related data including HS‑code, tariff and regulatory conditions for import and export.

HS Code 2903999090
Summary 2903999090 halogenated derivatives of aromatic hydrocarbons VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0%

 Synonyms

This table collects all English aliases, systematic names and CAS‑related synonyms of the compound.

1-ethyl-2-iodo-3-methylbenzene
MFCD00052855
3-Ethyl-2-iodotoluene

 1-Ethyl-2-iodo-3-methylbenzene | FAQ

This section contains frequently‑asked‑questions about this compound, including basic parameters, properties, storage conditions and corresponding answers.

Q: What is the SMILES notation of 2-Ethyl-6-methyliodobenzene?
A: SMILES notation of 2-Ethyl-6-methyliodobenzene is CCc1cccc(C)c1I.
Q: What is the CAS number of 2-Ethyl-6-methyliodobenzene?
A: CAS number of 2-Ethyl-6-methyliodobenzene is 175277-95-9.
Q: What is the LogP of 2-Ethyl-6-methyliodobenzene?
A: LogP of 2-Ethyl-6-methyliodobenzene is 3.16200.
Q: What English synonyms does 2-Ethyl-6-methyliodobenzene have?
A: English synonyms of 2-Ethyl-6-methyliodobenzene: 1-ethyl-2-iodo-3-methylbenzene, MFCD00052855, 3-Ethyl-2-iodotoluene.
Q: What is the English name of 2-Ethyl-6-methyliodobenzene?
A: The English name of 2-Ethyl-6-methyliodobenzene is 2-Ethyl-6-methyliodobenzene.
Q: What is the boiling point of 2-Ethyl-6-methyliodobenzene?
A: Boiling point of 2-Ethyl-6-methyliodobenzene is 118-120ºC(15 torr).
Q: What is the safety information for 2-Ethyl-6-methyliodobenzene?
A: Safety information for 2-Ethyl-6-methyliodobenzene: S24/25.
Q: What is the molecular weight of 2-Ethyl-6-methyliodobenzene?
A: Molecular weight of 2-Ethyl-6-methyliodobenzene is 246.08800.
Q: What is the InChIKey of 2-Ethyl-6-methyliodobenzene?
A: InChIKey of 2-Ethyl-6-methyliodobenzene is PCSPENCTMKMGFE-UHFFFAOYSA-N.
Q: What is the molecular formula of 2-Ethyl-6-methyliodobenzene?
A: Molecular formula of 2-Ethyl-6-methyliodobenzene is C9H11I.

 1-Ethyl-2-iodo-3-methylbenzenefactory

This table lists manufacturers and suppliers of this compound, including vendor names and product supply reference information.

Shanghai Nianxing Industrial Co., Ltd
Dayang Chem (Hangzhou) Co., Ltd.
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.