Fmoc-D-Phe(4-Br)-OH

Modify Date: 2024-01-02 18:21:05

Fmoc-D-Phe(4-Br)-OH Structure
Fmoc-D-Phe(4-Br)-OH structure
Common Name Fmoc-D-Phe(4-Br)-OH
CAS Number 198545-76-5 Molecular Weight 466.324
Density 1.5±0.1 g/cm3 Boiling Point 660.8±55.0 °C at 760 mmHg
Molecular Formula C24H20BrNO4 Melting Point 170-172ºC
MSDS USA Flash Point 353.4±31.5 °C

 Use of Fmoc-D-Phe(4-Br)-OH


Fmoc-D-Phe(4-Br)-OH is a phenylalanine derivative[1].

 Names

Name (2R)-3-(4-bromophenyl)-2-(9H-fluoren-9-ylmethoxycarbonylamino)propanoic acid
Synonym More Synonyms

 Fmoc-D-Phe(4-Br)-OH Biological Activity

Description Fmoc-D-Phe(4-Br)-OH is a phenylalanine derivative[1].
Related Catalog
In Vitro Amino acids and amino acid derivatives have been commercially used as ergogenic supplements. They influence the secretion of anabolic hormones, supply of fuel during exercise, mental performance during stress related tasks and prevent exercise induced muscle damage. They are recognized to be beneficial as ergogenic dietary substances[1].
References

[1]. Luckose F, et al. Effects of amino acid derivatives on physical, mental, and physiological activities. Crit Rev Food Sci Nutr. 2015;55(13):1793-934.

 Chemical & Physical Properties

Density 1.5±0.1 g/cm3
Boiling Point 660.8±55.0 °C at 760 mmHg
Melting Point 170-172ºC
Molecular Formula C24H20BrNO4
Molecular Weight 466.324
Flash Point 353.4±31.5 °C
Exact Mass 465.057556
PSA 75.63000
LogP 6.18
Vapour Pressure 0.0±2.1 mmHg at 25°C
Index of Refraction 1.647
Storage condition Store at 0°C

 MSDS

Name: (R)-N-FMOC-4-Bromophenylalanine 95% (98% E.E.) Material Safety Data Sheet
Synonym: N-(9-Fluorenylmethoxycarbonyl)-4-Bromophenyl-D-Alanine
CAS: 198545-76-5
Section 1 - Chemical Product MSDS Name:(R)-N-FMOC-4-Bromophenylalanine 95% (98% E.E.) Material Safety Data Sheet
Synonym:N-(9-Fluorenylmethoxycarbonyl)-4-Bromophenyl-D-Alanine

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
198545-76-5 (R)-N-FMOC-4-Bromophenylalanine 95% unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 198545-76-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white to off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C24H20BrNO4
Molecular Weight: 466.32

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 198545-76-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(R)-N-FMOC-4-Bromophenylalanine - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 198545-76-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 198545-76-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 198545-76-5 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
Safety Phrases S24/25

 Synonyms

(r)-n-fmoc-4-bromophenylalanine
L-Phenylalanine, 4-bromo-N-[(9H-fluoren-9-ylmethoxy)carbonyl]-
Fmoc-L-phe(4-Br)-OH
4-Bromo-N-[(9H-fluoren-9-ylmethoxy)carbonyl]-L-phenylalanine
FMOC-PBR-D-PHE-OH
AmbotzFAA1681
FMOC-D-4-BROMOPHE
Fmoc-D-Phe(p-Br)-OH
(2S)-3-(4-Bromophenyl)-2-{[(9H-fluoren-9-ylmethoxy)carbonyl]amino}propanoic acid
MFCD00273459
Fmoc-4-bromo-D-phenylalanine
Fmoc-4-bromo-Phenylalanine
Fmoc-D-phe(4-Br)-OH
Fmoc-D-4-Bromophenylalanine
Top Suppliers:I want be here




Get all suppliers and price by the below link:

Fmoc-D-Phe(4-Br)-OH suppliers

Fmoc-D-Phe(4-Br)-OH price