DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II)

Modify Date: 2024-01-14 19:48:35

DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II) Structure
DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II) structure
Common Name DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II)
CAS Number 203714-71-0 Molecular Weight 600.606
Density N/A Boiling Point 383.4ºC at 760 mmHg
Molecular Formula C28H45Cl2OPRu Melting Point 195-197ºC(lit.)
MSDS Chinese USA Flash Point 195.6ºC
Symbol GHS02
GHS02
Signal Word Warning

 Names

Name dichloro-[(2-propan-2-yloxyphenyl)methylidene]ruthenium,tricyclohexylphosphane
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 383.4ºC at 760 mmHg
Melting Point 195-197ºC(lit.)
Molecular Formula C28H45Cl2OPRu
Molecular Weight 600.606
Flash Point 195.6ºC
Exact Mass 600.162903
PSA 22.82000
LogP 10.01880
Vapour Pressure 9.7E-06mmHg at 25°C
Storage condition 2~8°C

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Hoveyda-Grubbs Catalyst 1st Generation
CAS-No.: 203714-71-0
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Flammable solids (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Highly flammable.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordWarning
Hazard statement(s)
H228Flammable solid
Precautionary statement(s)
P210Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R11Highly flammable.
S-phrase(s)none
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms: Dichloro(o-
isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II)
Formula: C28H45Cl2OPRu
Molecular Weight: 600,61 g/mol
ComponentConcentration
Dichloro(o-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II)
CAS-No.203714-71-0-

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Oxides of phosphorus, Hydrogen chloride gas, Ruthenium oxide
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or
by wet-brushing and place in container for disposal according to local regulations (see section 13). Keep in
suitable, closed containers for disposal. Contain spillage, pick up with an electrically protected vacuum
cleaner or by wet-brushing and transfer to a container for disposal according to local regulations (see
section 13).
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition -
No smoking.Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Handle and store under inert gas. Light sensitive. Air sensitive.
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Body Protection
Flame retardant antistatic protective clothing, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: solid
Colour: brown
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 195 - 197 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evaporation rateno data available
i) Flammability (solid, gas) The substance or mixture is a flammable solid with the subcategory 2.
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
Incompatible materials
Strong oxidizing agents, acids, Bases
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. May cause respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesMay cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as
this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: 1325IMDG: 1325IATA: 1325
UN proper shipping name
ADR/RID: FLAMMABLE SOLID, ORGANIC, N.O.S. (Dichloro(o-
isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II))
IMDG: FLAMMABLE SOLID, ORGANIC, N.O.S. (Dichloro(o-
isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II))
IATA:Flammable solid, organic, n.o.s. (Dichloro(o-
isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II))
Transport hazard class(es)
ADR/RID: 4.1IMDG: 4.1IATA: 4.1
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

Section16. OTHER INFORMATION
Further information
Copyright 2011 Co. License granted to make unlimited paper copies for internal use only.
The above information is believed to be correct but does not purport to be all inclusive and shall be used
only as a guide. The information in this document is based on the present state of our knowledge and is
applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Co., shall not be held liable for any damage
resulting from handling or from contact with the above product. See reverse side of invoice or packing slip
for additional terms and conditions of sale.

 Safety Information

Symbol GHS02
GHS02
Signal Word Warning
Hazard Statements H228
Precautionary Statements P210
Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
Hazard Codes F+
RIDADR UN1325 - class 4.1 - PG 2 - Flammable solids, organic, n.o.s., HI: all

 Precursor & DownStream

Precursor  2

DownStream  0

 Articles11

More Articles
Ruthenium-based heterocyclic carbene-coordinated olefin metathesis catalysts.

Chem. Rev. 110 , 1746, (2010)

Olefin Metathesis and Beyond A list of abbreviations can be found at the end of this article.

Angew. Chem. Int. Ed. Engl. 39 , 3012, (2000)

The advent of well-defined catalysts for olefin metathesis which combine high activity, durability, and excellent tolerance towards polar functional groups has revolutionized the field. The past decad...

The development of L2X2Ru=CHR olefin metathesis catalysts: an organometallic success story.

Acc. Chem. Res. 34 , 18, (2001)

In recent years, the olefin metathesis reaction has attracted widespread attention as a versatile carbon-carbon bond-forming method. Many new applications have become possible because of major advance...

 Synonyms

Dichloro(o-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium(II)
Dichloro(2-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium (II)
Hoveyda-Grubbs Catalyst 1st Generation
Hoveyda-Grubbs first generation catalyst
Phosphine, tricyclohexyl-, compd. with dichloro[[2-(1-methylethoxy)phenyl]methylene]ruthenium (1:1)
Dichloro(2-isopropoxybenzylidene)ruthenium - tricyclohexylphosphine (1:1)
MFCD03453042
dichloro(tricyclohexylphosphine)-(o-isopropoxy-phenylmethylene)ruthenium(II)
Top Suppliers:I want be here



Get all suppliers and price by the below link:

DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II) suppliers


Price: ¥384/250mg

Reference only. check more DICHLORO(O-ISOPROPOXYPHENYLMETHYLENE)(TRICYCLOHEXYLPHOSPHINE)RUTHENIUM(II) price