1-[4-(4-Morpholinyl)phenyl]methanamine structure
|
Common Name | 1-[4-(4-Morpholinyl)phenyl]methanamine | ||
---|---|---|---|---|
CAS Number | 214759-74-7 | Molecular Weight | 192.258 | |
Density | 1.1±0.1 g/cm3 | Boiling Point | 361.4±42.0 °C at 760 mmHg | |
Molecular Formula | C11H16N2O | Melting Point | 44ºC | |
MSDS | USA | Flash Point | 172.3±27.9 °C |
Name | (4-morpholin-4-ylphenyl)methanamine |
---|---|
Synonym | More Synonyms |
Density | 1.1±0.1 g/cm3 |
---|---|
Boiling Point | 361.4±42.0 °C at 760 mmHg |
Melting Point | 44ºC |
Molecular Formula | C11H16N2O |
Molecular Weight | 192.258 |
Flash Point | 172.3±27.9 °C |
Exact Mass | 192.126266 |
PSA | 38.49000 |
LogP | 0.23 |
Vapour Pressure | 0.0±0.8 mmHg at 25°C |
Index of Refraction | 1.568 |
Synonym:None Known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Causes burns. Potential Health Effects Eye: Causes eye burns. Skin: Causes skin burns. Ingestion: Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Chronic: Chronic exposure may cause effects similar to those of acute exposure. Section 4 - FIRST AID MEASURES Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately. Skin: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid immediately. Wash clothing before reuse. Ingestion: Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use foam, dry chemical, or carbon dioxide. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Storage: Store in a cool, dry place. Store in a tightly closed container. Corrosives area. Store under an inert atmosphere. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 214759-74-7: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: yellow Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 44 - 49 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C11H16N2O Molecular Weight: 192.26 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not currently available. Conditions to Avoid: Dust generation. Incompatibilities with Other Materials: Acid chlorides, strong oxidizing agents. Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 214759-74-7 unlisted. LD50/LC50: Not available. Carcinogenicity: 4-Morpholinobenzylamine - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Ecotoxicity: Fish: Pseudomonas putida: Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.* Hazard Class: 8 UN Number: 3259 Packing Group: III IMO Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S. Hazard Class: 8 UN Number: 3259 Packing Group: III RID/ADR Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S. Hazard Class: 8 UN Number: 3259 Packing group: III Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 34 Causes burns. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 214759-74-7: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 214759-74-7 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 214759-74-7 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | C: Corrosive;Xi: Irritant; |
---|---|
Risk Phrases | R34 |
Safety Phrases | 26-36/37/39 |
RIDADR | UN 2735 |
HS Code | 2934999090 |
~22% 1-[4-(4-Morphol... CAS#:214759-74-7 |
Literature: Abbott Laboratories Patent: US6933311 B2, 2005 ; |
~% 1-[4-(4-Morphol... CAS#:214759-74-7 |
Literature: US2008/153843 A1, ; Page/Page column 47 ; |
~% 1-[4-(4-Morphol... CAS#:214759-74-7 |
Literature: Angewandte Chemie - International Edition, , vol. 46, # 43 p. 8266 - 8269 |
~% 1-[4-(4-Morphol... CAS#:214759-74-7 |
Literature: Journal of Medicinal Chemistry, , vol. 50, # 15 p. 3651 - 3660 |
HS Code | 2934999090 |
---|---|
Summary | 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
4-Morpholinobenzylamine |
1-(4-Morpholin-4-ylphenyl)methanamine |
4-morpholino-benzylamine |
1-[4-(4-Morpholinyl)phenyl]methanamine |
1-[4-(morpholin-4-yl)phenyl]methanamine |
MFCD02682050 |
Benzenemethanamine, 4-(4-morpholinyl)- |
[4-(Morpholin-4-yl)benzyl]amine |