2-(Difluoromethoxy)benzylamine

Modify Date: 2024-01-30 11:49:43

2-(Difluoromethoxy)benzylamine Structure
2-(Difluoromethoxy)benzylamine structure
Common Name 2-(Difluoromethoxy)benzylamine
CAS Number 243863-36-7 Molecular Weight 173.160
Density 1.2±0.1 g/cm3 Boiling Point 214.1±35.0 °C at 760 mmHg
Molecular Formula C8H9F2NO Melting Point N/A
MSDS USA Flash Point 83.3±25.9 °C

 Names

Name 2-(difluoromethoxy)benzylamine
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.2±0.1 g/cm3
Boiling Point 214.1±35.0 °C at 760 mmHg
Molecular Formula C8H9F2NO
Molecular Weight 173.160
Flash Point 83.3±25.9 °C
Exact Mass 173.065216
PSA 35.25000
LogP 1.18
Vapour Pressure 0.2±0.4 mmHg at 25°C
Index of Refraction 1.488

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
2-(Difluoromethoxy)benzylamine
Product Name:
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H301:Toxic if swallowed
H319:Causes serious eye irritation
P301+P310:IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing

Section3. Composition/information on ingredients.
Ingredient name:2-(Difluoromethoxy)benzylamine
CAS number:243863-36-7

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
This product should be handled only by, or under the close supervision of, those properly qualified
Handling:
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels, refrigerated.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula: C8H9F2NO
Molecular weight: 173.2

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
UN Number:UN2811Class: 6.1Packing group: III
Proper shipping name: TOXIC SOLIDS, ORGANIC, N.O.S. (2-(Difluoromethoxy)benzylamine)

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes C: Corrosive;Xi: Irritant;
Risk Phrases R34
Safety Phrases S26-S36/37/39-S45
RIDADR 2735
Packaging Group II
Hazard Class 8
HS Code 2922199090

 Customs

HS Code 2922199090
Summary 2922199090. other amino-alcohols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

Benzenemethanamine,2-(difluoromethoxy)-(9CI)
MFCD00236229
[2-(Difluoromethoxy)phenyl]methanamine
RARECHEM AL BW 1745
Z1R BOYFF
Benzenemethanamine, 2-(difluoromethoxy)-
1-[2-(Difluoromethoxy)phenyl]methanamine
2-(3-METHYL-BENZYL)-PENTANEDIOIC ACID.
2-(Difluoromethoxy)benzenemethylamine
2-(Difluoromethoxy)benzylamine
2-(Difluoromethoxy)benzenemethanamine
1-[2-(Difluoromethoxy)phenyl]methylamine
Top Suppliers:I want be here


Get all suppliers and price by the below link:

2-(Difluoromethoxy)benzylamine suppliers

2-(Difluoromethoxy)benzylamine price