![]() 1,1-DIFLUOROETHYLENE structure
|
Common Name | 1,1-DIFLUOROETHYLENE | ||
---|---|---|---|---|
CAS Number | 24937-79-9 | Molecular Weight | 64.034 | |
Density | 1.0±0.1 g/cm3 | Boiling Point | -85.7±8.0 °C at 760 mmHg | |
Molecular Formula | C2H2F2 | Melting Point | 166-170ºC | |
MSDS | Chinese USA | Flash Point | -90.9±6.3 °C |
Name | poly(vinylene fluoride) |
---|---|
Synonym | More Synonyms |
Density | 1.0±0.1 g/cm3 |
---|---|
Boiling Point | -85.7±8.0 °C at 760 mmHg |
Melting Point | 166-170ºC |
Molecular Formula | C2H2F2 |
Molecular Weight | 64.034 |
Flash Point | -90.9±6.3 °C |
Exact Mass | 64.012459 |
LogP | 1.25 |
Vapour Pressure | 26177.0±0.1 mmHg at 25°C |
Index of Refraction | 1.265 |
Stability | Stable. Incompatible with strong oxidizing agents, silica. |
Water Solubility | some polar solvents such as organic esters and amines: soluble | Soluble in organic esters, dimethylacetamide and amines. Insoluble in water. |
Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
---|---|
Hazard Codes | C: Corrosive;T: Toxic; |
Safety Phrases | S22-S24/25 |
RIDADR | NONH for all modes of transport |
WGK Germany | 3 |
HS Code | 3904690000 |
HS Code | 3904690000 |
---|
Sensitivity of pressure sensors enhanced by doping silver nanowires.
Sensors (Basel.) 14(6) , 9889-99, (2014) We have developed a highly sensitive flexible pressure sensor based on a piezopolymer and silver nanowires (AgNWs) composite. The composite nanofiber webs are made by electrospinning mixed solutions o... |
|
A new method for permeability measurement of hydrophobic membranes in Vacuum Membrane Distillation process.
Water Res. 47(6) , 2096-104, (2013) In this paper, a new method for permeability measurement of hydrophobic membranes used in Vacuum Membrane Distillation, instead of common measurement methods, was proposed. As VMD is a pressure and te... |
|
Preparation of polyvinylidene fluoride nanofiber membrane and its antibacterial characteristics with nanosilver or graphene oxide.
J. Nanosci. Nanotechnol. 13(9) , 6269-74, (2013) Polyvinylidene fluoride (PVdF) (Kynar 761) nanofibers were prepared by electrospinning at an external voltage of 6-10 kV, a traveling distance of 7-15 cm and flow rate of 0.4-1 ml/hr. Although the dia... |
Ethene, 1,1-difluoro- |
difluoroethene |
vinylidine difluoride |
ETHYLENE, 1,1-DIFLUORO- |
VINYLIDENE FLUORIDE POLYMER |
1,1-difluoro-ethenhomopolymer |
1,1-Difluoroethylene polymer |
1,1-Difluoro-ethene |
Halocarbon 1132A |
MFCD00084470 |
PVDF |
1,1-DIFLUOROETHYLENE |
1,1-Difluoroethene |
Polyvinylidenefluorideresin |
PVF2 |
Poly(vinylidene fluoride) |
vinylidene fluoride |
Polyvinylidene fluor |